Viewing all customer Discussions for:

55-106-6 Weather-stripping, 6' length

Hello I have attached a picture with the dimensions of the weather strip that is located on the bottom interior of the top sash of my double hung Norco windows. I would like to know if you carry a replacement strip for this window. Thank You Don

Need weather stripping mine has failed. need to know what to order

This is from a wooden,single pane, double hung window circa 1978. It is a metal air seal between the horizontal portions of the windows where they meet. It slides into a kerf or slot on the upper window. It is 1/4 by 3/8 by 1/8. Both edges are turned under/folded over by 1/8. Do you have one of thes ... (cont.)

I need to replace all the weatherstripping at a clients home. The windows are all casement style with a Kerf holding this stripping in. The windows are 25-30 years old. In the photo the bottom edge measures 1/2 inch. This edge site against the window frame, The bottom right corner to the upp ... (cont.)

Hello Swisco, I've attached three photos to assist in identifying the appropriate replacement weather seal for my 1986 vintage Marvin wood windows. It appears to me that your product # 55-106-6 would work but I need your advise to insure that I'm on the correct path. I appreciate any time that yo ... (cont.)

I need to replace all of the stripping (or most anyway). It appears to be what is described as a "leaf" style. I appears to be the 55-106 style but I'd like to verify before ordering. Any body out there that can help? Thanks.

would your part #55-106-6 work on these windows? It is the only part that looks exactly the same.

I am look for new weather stripping for some 40 year old marvin casement windows. It appears to me that the old weather stripping looks like your part #55-106-6, can you verify for me this would be the type I need?

In the picture attached, I have removed the weatherstripping to show the kerf (it measures 3/32" wide) into which the weatherstripping was installed. I would like to replace this weatherstripping. The windows are about 27" wide, so if you have it available in 10' lengths, that would be best. Althoug ... (cont.)

I have a house with wood casement windows. The house was built in 1987. The marking on the screw out assembly says "Truth". I am assuming these are the brand of windows? You can see by the pictures what kind of weather stripping I need. The width of the actual window is 1 1/2 inches wide and the ... (cont.)

I'm looking for weatherstrip for Wenco casement windows installed in 1992. Your part #55-106-6 appears to be what I'm looking for as the cross section measurements seem to match. The attached photo shows the strip from the one window where it is still flexible.

Trying to find replacement weather stripping similar to the one pictured. The windows are Norco from about 1988. Do you have it? Thanks. John S.

We live in Colorado and recently bought a house that was flipped. It has the original casement windows from 1987 that appear to be made by a company called Wright. I have been unable to find that company on the web. The windows are still in excellent shape, however the weatherstripping that is ex ... (cont.)

Unfortunately you cannot purchase longer runs of the 55-106. 6 feet is the longest length we sell (55-106-6).

Any idea if the 55-106 will fit a Rockwell casement windows manufactured in 1995? Thanks!