Viewing all customer Discussions for:

39-348 Sill Mounted Awning Operator

I need some help with my 1986 Weather Shield windows. They are Casement crank outs with bad hardware. The double pain, wood windows are in good shape except for the cranks, which is why I am trying to save them. As you can see from the pictures the worm gear pushes right out of the housing when I tr ... (cont.)

Awning window/center mount...says truth on arms...(40011 and 40012) Cranks are stripped... Need 5 new ones... Suggestions?

The hardware indicates TRUTH 45002 and the arm indicate Truth patent # 3,457,675. The arm length measures 11-1/8" from center of pivot hole to center of mounting hole-widow. Arm length from gear end to arm end is 12". The base is 5" wide x 2-5/8" deep. The base has 4 mounting holes, the exterior ... (cont.)

I tried to use your 39-348 awning operator for a window in my mother's home, but I came up short. Please see the attached pictures. Do you have anything longer?

I need a replacement for this hardware piece but want to confirm the correct one. Mine measures 24-3/4" from one arm end to the end of the other. My best guess is your "Sill Mounted Awning Operator Product Code: 39-348" Please advise, Rocco On the bottom of my operator is Truth 45142 see p ... (cont.)

I'm looking for a replacement part for a window crank. I've attached a couple photos, the only part number I see is 45002. The two arms connect to a guide bar on the bottom of the window. Can you tell me if you carry this part or something similar?

Below are the pictures I called you about. The egress window says Wright & 07900 on the arm and the operator measures 4" The vertical operator says Truth on the arm of it and the operator is 5". Please reply to let me know you received this and if you have further information for me or if you h ... (cont.)

I have this window in my bathroom and the window crank had the lock nut strip out and now doesn't open or close! I'm looking for replacement parts to replace the handle and hardware. The info I have on the window is as follows: DF 1100 A CCMC 9186 Brevet U.S.A. 4.400,923 A3, B3, C3 Any help ... (cont.)

I need to find a replacement for this awning crank. The arms attach to sliders on a rail connected to the window.

I have a 20-y.o. Weathershield awning window with an operator similar to your 39-312. Do you think I could make the 39-312 fit my window?

Hello, will the 39-348 Sill Mounted Awning Operator be my best choice for replacement? My window width is 30"

Have to fix a window before I sell my house. It's some type of retaining clip that I can't find. I've attached a picture. Thank you

Hi! We have an aluminum frame sunroom with two crank out awning windows. Sunroom installed in 1990s by Patio Enclosures in Buffalo NY area. One of the crank windows cranks open but not closed as inner parts probably stripped (crank itself is fine). Do you deal with sunroom window parts? We are ... (cont.)

I need to replace this broken weathershield awning window operator. Can you help me find the replacement part?

I have Kolbe windows that are over 20 years old. I have an awning operator that the set washer will not hold in the pinion when attempting to close the window. I assume a new operator is in order and it appears the model 39-348 is the ticket. Do you know if this product will fit a Kolbe window? ... (cont.)

The spring inside the handle is gone so there is no fixing it I need a replacement. This is an awning window the brand is Caradco.

Please quote on furnishing a four (4) quantity of the following, delivered UPS ground to the Baltimore, Maryland area: Replacement crank metal operator hardware for a wood Weathershield Awning Window. The hardware is stamped and apparently manufactured by ‘Truth’. Our current hardware is fa ... (cont.)

Hi -- The crank base is 5 inches (length). please see the picture for specific look. Also, the crank handle has a #45012 and says US PAT#4083264. We need a full replacement for the crank handle and operator (it seems to be striped). Thanks, Sian

I have a truth casement window awning style opening, I need bottom center crank out assembly with double opening arms 13" long. I did not see it on your website. any thoughts Thanks

I have an awbning window that needs to have the crank replaced (the gear is stripped). The cover indicates TRUTH HARDWARE & the numkber on the mechanism is #40-761. The writing on the mechanism is "TRUTH ENTRY GARD." ne arm is stamped #40762 & the other arm is stamped 40761. just need the mechani ... (cont.)