Viewing all customer Discussions for:

23-099 Paniflex Center Spring Loaded Roller

I have included photos of the four parts that I need, but I need different quantities of each part.

this part came off a bi-fold door, the orginal piece had a longer stem on top.

Need both left and right spring loaded roller. The closest I see is the Paniflex center spring loaded roller, all the dimensions are the same except the location of the roller (center) instead of left and right

looking for top bracket with nylon ball ( no markings) and hinge with "CDM" stamped on it. Doors weigh approximately 60 lbs. No markings on the door.

BifoldCloset

Hello. I have to remove some bifold doors to redo my floors. Google lens identifies the hardware as Swisco. YouTube videos have not helped in how to remove the doors. I am attaching three images of the door hinges. I hope you can tell me how to remove the doors.

Bifold pivot and roller guide upper

Need to get new track you can only been these old tracks so much and then part stop fitting right in track need replacement .

Almost matches paniflex 23-142 but differences in roller dimensions: mine is 3/4" diam and 5/16 ht, so wider and shorter than your item. I also need a linkage comprised of 2 springs with a metal plate at each end which goes across the central hing, I assume to add rigidity when closed. See photo -- ... (cont.)

I just made an order on your site for this part. Just want to make sure it is the right one. My order number is 2362337.Please check it and let me know Thanks. Charlie

Hi - I was hoping you'd be able to help me with identifying a bifold track. Not sure if its Swisco. Track is mounted around a 1 x 2 which is attached to the ceiling, and then there is the track below it. The size of the part encapsulating the 1 x 2 is about 1 5/8 inches wide The track side to sid ... (cont.)

Hello, I am looking for replacement parts to replace mirror bifold door hardware. Original parts, as shown in pictures, would be ideal, but I am open to alternatives. As you can see the top pivot is bent. I would greatly appreciate if you can help with identifying part and an advice. Thanks, Oleg ... (cont.)

whoever got my last email about bifold door number one this now below is bifold door number two can I put I I guess I'll put glue on the top and then a new piece. I don't know. I need your help very very very very badly. All the doors have mirrors on them, and they are all very heavy the The middle ... (cont.)

I need a 3/8" x 2 1/4" spring for a heavy bifold door. Can you help me? Do you need pictures?

Before I remove these doors I want to try to repair them. Here is a link to the parts I am asking about:https://photos.app.goo.gl/cbQMRLUs1QcpNkSe7These are for bifold doors. The slabs are still in decent shape but very thin, not like the thicker slabs you see now. I will attempt to refresh them be ... (cont.)

The original invoice issued by Home Depot in 2007 is attached for reference. It was a custom order. We couldn't find the supplier's name and the part number for the replacement. If found we would order a few to keep for future use. Thank you for the assistance. Yung

Is a part for a mirror by fold door

Good day! Please see attached photo, can you help me to find the complete parts?

Can you assist with replacement parts for these rollers. Don't know the door manufacturer.

I need two of this