Viewing all customer Discussions for:

81-256 Sliding Glass Door Roller, 1-1/4"dia. Steel Concave BB

Good afternoon, I'm looking to replace all the roller assemblies on my old "Arcadia" brand sliding glass patio doors from the 1970's. Need a total of (4) roller assemblies. Thank you, Tom

18 mm wide. 30 mm high. 58 mm long. Single nylon roller

The roller assemblies I am replacing are 1 5/8 inches high, 2 1/2 inches long, 3/4 inch wide, and have a 1 1/4 inch diameter steel wheel

The sliding door is original to the house. The house was built in 1965. The brand of the patio door is Arcadia. The rollers are plastic over steel. I used a caliper to measure the roller, and it is 1.25" overall outside diameter. The roller assembly measures 11/16" wide or thick at the top/bottom ... (cont.)

Need replacement wheels

no part number markings on the roller

My name is Carlos with Montebello Glass & Mirror Co. You guys do a great job at identifying parts by only using pics! I was wondering if you can help me with this patio door rollers: o We have no idea who the manufacturer of the door is o Roller might not even be the original part but it does func ... (cont.)

Hello. I am looking for replacement rollers for my Alenco Sliding Glass Doors. Please see the attached photos and for label. Please help if you can. Thank you.

See pics. Alenco glass doors SGD-B1 Series 550, 650. Need Door Roller part numbers identified and replacement parts ordering information.

I need a roller for a sliding glass door probably installed in the early 1980s. The roller itself is worn out.

These wheels are from a large 4 x 8 mirror closet door (2 each). They mount on the bottom outside corners of the door, tab up, facing the outside edge, behind a valance, they are not in aq channel, with a 2" sheet metal screw through the hole in the tab, with the tab facing the outside edge (note th ... (cont.)

Hello, hope these pictures will give you an idea of the roller type I need. The measurements of L 2.25 x H 1.5 x W 0.75 are approximate.

Hello,I need help ID'ing these rollers. I just tuned some aluminum doors probably from the 1970's yesterday. These were the rollers. I neglected to measure the width of the assembly and height. The features that seem to stand out are the locking tabs on the front and back of the carriage. I did ... (cont.)

Hello Can you help me identify a pair of replacement rollers for my 1985 Likit sliding aluminum and double paned glass sliding patio door?

I need help identifying replacement rollers.

Looking for some quality replacement rollers for the attached pictures. Do you know what model these would be?

I'm looking to replace the lock and handle for my Arcadia sliding patio door. It has a sticker mentioning "Series 600". Also the rollers if these are standard.

Hello I need the two bottom roller mechanisms for my glass patio door, the dimensions of the slider are 78"x36'x1,1/2" The roller assembly itself as pictured is 2 and 1/2 inches long by 3/4 inches width by 1 and 1/4 inch with the wheel mechanism able to extend out another 1/4 inch The only marki ... (cont.)

Roller for sliding glass aluminum door wheel 11/8x 3/8. Housing 2 1/2x 1 1/2

No numbers on old part, 15/16 wide, 1 3/16 tall, 1 1/16 steel wheel, the numbers to identify the complete door are SGD-R20-96/96, MFR Code PRW-1. Thanks, Brian also would like to get the double wheel set. Large and heavy door, just thinking more wheel are better.