Viewing all customer Discussions for:

81-256 Sliding Glass Door Roller, 1-1/4"dia. Steel Concave BB

I'm looking to replace the lock and handle for my Arcadia sliding patio door. It has a sticker mentioning "Series 600". Also the rollers if these are standard.

Hello I need the two bottom roller mechanisms for my glass patio door, the dimensions of the slider are 78"x36'x1,1/2" The roller assembly itself as pictured is 2 and 1/2 inches long by 3/4 inches width by 1 and 1/4 inch with the wheel mechanism able to extend out another 1/4 inch The only marki ... (cont.)

Roller for sliding glass aluminum door wheel 11/8x 3/8. Housing 2 1/2x 1 1/2

No numbers on old part, 15/16 wide, 1 3/16 tall, 1 1/16 steel wheel, the numbers to identify the complete door are SGD-R20-96/96, MFR Code PRW-1. Thanks, Brian also would like to get the double wheel set. Large and heavy door, just thinking more wheel are better.

Took this roller assembly off a slider I think dates to the latter 1970's. Labelled as: Del Mar Eng. Long Beach, Cal. Pat. Pend. No other markings that I can find. On a trip to Home Depot I found nearly the identical part-- That protruding tang above the height adjustment that lets the screw that s ... (cont.)

Can these be overnighted ASAP

Del Mar Eng, Long Beach Ca Pat 3,674,357 sliding glass patio door rollers (2)

I have a patio door from LIKIT and is apparently no longer in business. The door is circa 1990. Wheel assemblies are worn to the extent its hard to open and close the door. Upon removal, the axles for the wheels seem be worn. I've added grease, but its still difficult to open and close. I need ... (cont.)

My name is Ray. This is a old 1978 Likit sliding glass door 8 foot. Wheel supports are broken. do have a good replacement part roller assemblely.

Attached are some pictures of the roller from my sliding glass door. I do not know the manufacturer but I am pretty sure the door was made in the mid to late 70's. Please let me know if you can find the part for me.

Hi! My name is Lisa and I have a Milgard sliding glass door from 1986 that needs a new wheel assembly on both sides of the moving door. Unfortunately, Milgards " lifetime warranty" doesn't extend past 1988. Uploaded are pics of them, plus the model# sticker. In my haste to get the door back on, I d ... (cont.)

Markings: Del Mar Eng Long Beach CA Pat Pending it looks like the D7000 series style from PE Del Mar catalog p 13, but I am not sure which one it is the wheel diameter is 1.5" on PE Del Mar catalog B=D=1.48" A =.625 I would like stainless steel as the door is near the ocean

Hi, can anyone tell me if i can get a 81-256 with 1.5 inch wheels?

Can't seem to find the attached. Need 4 if possible.

Hello, do you sell replacement rollers for my slider. I don't see any numbers but they are Arcadia sliders from 1970.

Total width 3 inches Height 1 5/8 Width 5/8 Wheel 1 1/8. Looks to be nylon over steel hub For an older sliding door No mfgmarkings that I could find

Can't find this roller assembly anywhere. The closest I see is #81-039 but mine also has the smaller wheel. Hope pics help.

1 1/4" single roller. 11/16 wide, approx 3" long. The assembly has bent out tabs at the wheel end about mid height. These tabs are small and increase width to about 7/8" The tabs locate the assembly in the door.This sliding door is an old metal frame door from about 1974. Otherwise in fine condition ... (cont.)

Length is 2-1/4", width at non-roller end is 3/4", roller end is 9/16", wheel is 1-1/2" diameter wheel, height at roller end is 1-7/16"

Hello, I am looking for sliding door rollers for some older aluminum door rollers. Saw some that look similar but they did not have the tabs on the side. Thanks, Drew