Viewing all customer Discussions for:

23-501 2 Door Bypass Closet Door Hardware Kit, 5ft

Looking for offset top door roller. Appear to be 1” offset. Didn’t see on your website. Also need bathroom door lock for pocket door, see last picture. In addition, need floor guide for closet doors. Space between floor and bottom of door is 1 1/8.

I need to buy the part like this one

I have an old closet door that has a broken roller that I'm looking to replace. It doesn't look like there is any offset these look like straight brackets. The diameter of the roller is 3/4 of an inch. The thickness of the roller is a little bit more than an eighth of an inch

Hi I'm looking to replace the hangers on sliding closet doors in a bedroom. Our house was built in the 1950's so these are the original doors that are quite heavy. Trying not to replace the doors if possible. The dimensions on the hangers are 1/2" wheel and 1" offset. If I cannot find these, is ... (cont.)

It's a 1 inch offset with a 7/8 nylon wheel.

I need a new hanging system for my 70-year old bypass doors. The double-J channel is only 1-1/2" wide. The doors are 1-3/8" thick.

I need a replacement for a top roller on bifold door. The top diameter of the roller is 5/8" the bottom is 3/8". The door is 1 1/8" thick The bracket is marked HAR VEY

Looking for rear hanger replacement roller for bypass closet doors.

Hi - I purchased 8 kenna track closet door hangers and received today. Unfortunately they don't fit the track - the wheels are wider and thicker than the ones I need to replace.The old ones have a wheel with width 3/16" and diameter 3/4". The new ones have width 1/4" and diameter 7/8". Can you hel ... (cont.)

I have a fifth wheel RV, with sliding mirror closet doors. The frame is wood (or some material that looks like wood :) ). Door opening is 86" and each door is 44". The hardware is extremely cheap and flimsy. I've included photos. I would like to replace the the hardware (or at least the bottom hardw ... (cont.)

HI Swisco!I received an order a set of front and rear closet door roller hangers.I need the same offsets for both front and rear but need the smaller roller wheel (2mm) as these are for older doors and track.Picture attached.Can you help and thank yo in advance!John

Us Pat 3041657

I am trying to find a replacement for this Stanley closet door wheel/roller.

Looking for these closet rollers . 1962 home . Have original closet doors , need rollers . Thank you

When I measured the hardware the roller assembly seems to have a 7/8 in diameter concave wheel and one seems to be between a fourth and a half inch offset and the other one appears to be 1/8 inch offset. I took a picture of the track and as you can tell it's had many years of paint slapped on it. Th ... (cont.)

Looking for replacement rollers for a bi-pass sliding closet door.

Hello Swisco, I know Lawrence Brothers is out of business. I believe another manufacturer made a replacement for some of their closet door rollers. Attached is a picture of the ones my customer is looking for. Do you have something that will work in its place. 3/4 rollers, 1 1/8 from inside plate ... (cont.)

The order that was sent was not the right ones. It has a 3/4 roller and 7/8s. This is the 3rd time sending pictures. Please let me know if you can help. See the 4 photos sent above. Any questions please callThomas

Please let me know if you have any thing that would work. I am doing both doors so will be needing full set.

We bought a house that has wood sliding doors in bedroom, bathroom and hallway. Not one door is working properly and I want to try to keep the doors. The doors are 1 5/16" thick so the standard track at the home improvement stores are not wide enough for the doors. I'm looking to replace the ro ... (cont.)