Viewing all customer Discussions for:

23-501 2 Door Bypass Closet Door Hardware Kit, 5ft

Looking for parts or replacement. The roller is 1 inch diameter

I need a track for my closet door 59 in long 2---60 lb doors Dimentions in pictures Thank You John

The bracket for sliding door is1inch high and 1 3/8inch wide. The roller brackets are 1 1/2 inch wide, 1 1/4 inch high. Wheels are 7/16 -1/2 diameter offsets of wheels are 1/16 and 3/8. Looking for these parts.

Hopefully you have this or a newer version that will work

I'm looking for hardware for bypass closet door replacements. I can't find any number or brand on the existing hardware. The home is from 1956, so the doors could be this old. I need two sets for each of two rear doors. I'd appreciate your help.

I'm looking for the Leigh 1 3/8 rollers for my closet doors

Hello. Can you please tell me what type I need? I need 16. Thanks!

Hi ,I am looking to replace a Stanley Dial closet Roller. I recently tried one from National Hardware (V-795) but it didn't work . The wheel is to close to the track.The ones I am trying to replace have a .125 shoulder. Wheel diameter is.84 .Offset is 7/16. I have attached photos. Both doors had th ... (cont.)

We currently have sliding mirror doors in our master bathroom and I wanted to convert it from rolling on the floor to having rollers on a track overhead. I was wondering if i used 23-501 for the overhead track, 23-200 for the floor guide and 23-027 forth rollers to replace this And I assume I just r ... (cont.)

Looking to replace this grant rocket carrier, in the one attached the wheel broke off. If I am unable to find this part, can i replace all the carriers and not the track with something similar?

Hi, I need a few 1960's Stanley Rollers with these dimensions: Outside wheel dimension: 3/4" Inset of Roller over door: 1/4" thanks, Vinit

I believe these were made in the 60's. There are 2 almost exactly on your website, but I thunk the depth is deeper. The wheel broke off it.

Pictured is the one roller I found on door. Need two, other is missing. Nylon roller is 7/8". This example has roller tilted, but I think a straight roller or a roller offset some to rear would work. Forward offset, as available retail, results in interference with rear door. Part is marked TENNATR ... (cont.)

Sir/Madam I need replacement rollers like the ones attached to this email ? they are old and I had to cut the screws to get the old door down.. they are from the Sixties? Har-Vey was manufacturer?. Please help!

I have two very old solid wood louvered sliding doors and I am looking for heavy duty adjustable wheel assemblies. The pictured hardware came with the doors, but is missing the adjustment plate. The big box stores don't appear to have anything to replace these. Do you have anything I could use to re ... (cont.)

looking for replacement 1959 home. closet bypass doors. I believe these are 3/8 offset 7/8" rollers. all the ones I found locally do not work. drags on bottom

Sliding doors maybe from 60-70s?.?. Roller came off, I've bought several different ones over last few weeks, nothing fits. The roller looks to be ½ x ½ though can be sure without removing 1. Thanks for any help.

I ordered the 23-087 on order number 1734353. See my picture, attached. The roller looks like my original (the black wheeled roller, loose). Your roller wheels are now white (attached to the door in photo). However my real issue is my rollers are 3/4", but on the 23-087, they're 7/8, and they do ... (cont.)

Roller is 3/4" diameter with offset of 7/8" inch when measured from the inside of the offset; 1" when measured from outside of the offset. I've tried to upload Need replacement ASAP as I'm trying to sell my house. Will pay for expedited delivery/service. Tried to upload photos but kept "Connecti ... (cont.)

Do you sell this product?