Viewing all customer Discussions for:

32-119 Grass Adapter Bracket Pair

Looking for replacement drawer rail brackets for a diamond cabinets Calhoun vanity

Looking for merillat rear bracket mounts for slides for kitchen drawer. Number inside part is 471037 Thank you

Used for the rear socket of a kitchen island slide drawer. About 1 inch hole for the socket. Only marking I can find is "3808" on the inside. I saw some postings about your 32-119 but that won't work because I can't drill into the back of the cabinet as it's for a kitchen island and would drill r ... (cont.)

Looking to replace cracked plastic end peice, only marking on slides is unigrass

Need to replace the boot guide. If it's the right one will by at least four.

This is a bracket that can be found at the end of a drawer. It serves to hold the drawer in position. I would need a right bracket and a left bracket. Thank you!

Hello - this part is a kitchen cabinet drawer slide mount. It fits in two holes near the back of the cabinet. There are no markings, just "left" and "right". The drawer rail fits inside of it as pictured in image "..185118"

Im looking for these do you carry these in plastic or metal

I need a replacement for a drawer slide rear bracket. It's for a kitchen island so i can't use a traditional bracket that screws in the back because the screws will protrude from the finish. This particular bracket slides onto a metal frame mounted onto the back of the inside of the cabinet as shown ... (cont.)

Some how the bracket came off and we lost it

This is a Merillat cabinet from the early 90.This drawer dive at the rear.When trying to place the piece of IMG1658, it is too short for holding. I noticed a bent at the back end of this piece. Is that the reason. What should I buy for replacement?

This is the part that is still in the cabinet. There is another part that is broken. (I do not know how to add a second picture). Do you have a part for repairing this failure? The cabinet was installed in my kitchen in 1990 and the drawer that failed is the one that has my silverware in it. If ... (cont.)

This piece broke. Can you help me find one?

Brackets are located between draw slates and with out 6600 old rear supports I would have to take cabinets apart. The slide on the back would make it easy to replace. Your friend, hard to reach....

Having difficulty finding this part.

We have a total of 6 drawers. The pieces we need are 2 1/4 " each. The cabinets were made by Scheirich. My parents are elderly and I am visiting for a short time. I need to get these fixed before I leave. Any help in getting these would be much appreciated.

This plastic bracket is broken on two of my kitchen cabinets, causing the drawers to fall of the tracks and downward. I'd like to replace these before reinstalling a new brackets style. The plastic piece snaps into this black bracket behind the back of the drawer.

I need both sides times 2 for the end supports for the pictured rail. Rail has KV and a smaller CR stamped on it.

Late 80's cabinets have these plastic pieces that sliding drawer tracks go into. They are starting to break. Do you have replacement pieces? Got the broken piece(s) out, 301515 is the number stamped on the plastic piece.

I saw similar on posts but the replacement doesn't look like it would work. As you can see on the inside of the cabinet the back has a piece of wood to help support the bracket. disappointed that I can't find metal replacements....doesn't seem plastic is very strong.......