Viewing all customer Discussions for:

39-376 Encore Truth Folding Handle with Cover

Hi, I have 2 casement windows missing a left and a right handles. A 3rd window is missing a cover. I am enclosing a few photos for your review and assessment. Please note the crank mechanism is 5.25 inches.

Gears pop up and down slipping out of contatct with each other under the tension of use. Looks like they were forced open or closed as part of the mechanism is bent. Both right and left need replaced. Do you know the part #? 39-438B?on arm C-C40-31x55, 40986

Not sure if the whole thing needs replacing but the window wont close anymore

Hurd window crank teeth are worn out and window doesn't close anymore

Hopefully you can identify the Truth casement window cranks that we have. Both the right and left handles have broken. There may be more problems, but to avoid taking out all the wood to replace the gear mechanism, I thought I would start with replacing the handles--if available. If I need to buy ... (cont.)

Hi! I attached a couple photos of the missing window lever I am searching for and was wondering if you can tell from these photos what part I need. Or if not, what other information you would need to identify the part. I looked at the window and could not find any info about the manufacturer. Thanks ... (cont.)

I need help identifying what part I need to fix this window. In pic's #1 and #5 I circled the part on the left that cracked and the part on the window that clipped into it. The cracked part slides across the track and this doesn't have the same installation as your video does. Can you offer any h ... (cont.)

I have a defective window crank and would like to order a replacement. The window hinge is on the left and opens out.

Hello, I have a casement window which has Truth 30744A labelled on one of the arms. Looking through your inventory, it looks closest to the Encore Dual Arm Operator, Sill Mount (39-253RB). When turning the crank to close the window, the dark gear rises (shown by red arrow) and loses contact with th ... (cont.)

I need to know what the replacement part is for these windows Milgard Studio (east face) Series 5320/5331/5720, PL #032-143 The longest arm Measures 10.5"

Good afternoon, I would like to replace some of my worn out Hurd Window crank mechanisms. Could you advise what I should order to replace them. Also, will I be able to use the existing handle and cover with the new mechanism? Thank you!

The long arm is 9 inches, the short straight arm is 4-1/2 inches. I see numbers: 31538a on the curved arm, 45179 on the crank assembly, 40754 on the short arm, a 5 digit number on the long arm which I cant quite make out, first digit is either a 3 or an 8, last digits are 1272. I need a left ha ... (cont.)

Can you help me get a replacement pair.The long arm is 10 inches Thank you Jim P

Hi, I need this Truth window operator sourced. As well as the cover and handles. Operators for left hand and right hand. Thank you,

Good evening, some of the windows in my house do not open properly. They get stuck on the frame and some won't Close without me, pulling the window in. I don't know if it's the mechanism or what. But it looks like a product that you sell.

Our old model windows can't be closes tightly by the operator working. I need to replace this operator, but I couldn't find it at hardware stores. Do you have it in your store?

I have a property under management that have Harvey casement windows installed and the operators are slowy rusting away as the location is oceanfront. The windows were installed in the 1980's or 1990's. The hardware is TRUTH components, and the only number I can find which is on the pivot arm is 3 ... (cont.)

The handle snapped off the drive shaft for opening mechanism on the right side window. The parts photographed are of the left side. So I will need the opposite of the left side drive mechanism.

Hello! The gears on my window operator are stripped out and need to be replaced. Can you help me ID which window operator I have? Also, is it possible to only replace just the window operator and reuse the existing covers?

I have a single Jeld-Wen Awning Window that I'm hoping to track down hadware for, hopefully in black. Can you help?