Viewing all customer Discussions for:

23-240 48" Sliding Mirror Door Bottom Track

Fantastic! I am so thankful to have something go so smoothly, it was a welcome change. The not so tough part was removing the old parts, but just cliping in your replacement parts and a few turns of the screwdriver for adjustment and it was done. I replaced my Stanley upper glide part # 00-5024 wit ... (cont.)

I have a 48" mirrored sliding bypass closet door that was purchased at Lowes about 18 months ago. Just getting around to installing & it is missing the bottom track. It is an Oak ReliaBilt Bottom Roll Sliding Closet Door 88151 (64400) with convex wheels. Can you tell me if the 23-240 is the correct ... (cont.)

just purchased the 23-270 and the track is not wide enough. The doors fit in track but unable to put booth doors on because there is not enough clearance for them to slide past each other. Do you have one that is 3 1/2 inches wide and 48 long that is concave

Hi - looking for a replacement floor track for a pair of Stanley bypass closet doors. The doors were installed about 12 years ago, the track measures 3 3/4" wide by 47" long. The track is screwed to 7/16" wide by 1/2" tall strip of plastic that is nailed to the floor.

Glass closet sliding door bottom, Sliding door roller bottom, Sliding door roller top,

I think #23-241 is what I need, but not sure. Doors measure 9 ft. Does that mean I would need a 60" and a 48"? Thanks for input.

I purchased 2nd handhand 3 Wardrobe doors which came with no rails. I have identified that the fittings on the doors are made by your company. I have searched everywhere and can not find rails to match the doors. Could you please help me with the following questions? 1. Can I change the fittings ... (cont.)

How can I get a replacement track for a Monarch #PPG1-2-2S-89? The wheels are convex.

I think you'll recommend the 23-240 but i'm making sure. thank you.

I recently ordered a 72" Sliding Mirror Door Bottom Track (23-242) and a 48" Sliding Mirror Door Bottom Track (23-240). Unfortunately, the bottom door rollers I have are concave and too wide to fit in these tracks. After speaking with Jody, it sounds like I have two options; either swap the track ... (cont.)

We want to replace the bottom tracks on the sliding mirror doors at two closets. We need a 48 inch and a 72 inch piece. The doors were installed in 1990. It appears your product codes 23-242 and 23-240 are similar. I need to confirm that the bottom rollers are convex. I believe they are. There are n ... (cont.)

Good Morning, Need some help removing bottom 23-026 ???

See attached image of my lower track for a set of Stanley mirrored sliding doors. The doors are 48" and I want to relace the rusted lower track. Do you have areal cement for this?

Changed floors and lost the floor tracks of our old sliding mirror doors. Wheels run on top of the doors so no problem there, but what track do I need for the bottom ? Attachment 1 is the bottom fixture and attachment 2 is the door model? Thanks Stanley Mirror Monarch

I need a 48 inch lower track for mirrored doors . The glide is a bypass type part number 23-215. Which track do I order.

This is the vinyl track that 2 heavy sliding mirror doors glide on. They hang by rollers from the top. The wall to wall carpet was removed. I need new tracks to be laid. Can I re attach to concrete floor or do you recommend new tracks. Please advise!

Looking to replace sliding door tracks for 4 foot Stanley mirror doors. The only number I have are the ones posted behind the door on the sticker that is included on the photo attached. Do you have replacement parts? Thanks Janet

I need a new track for my mirrored, bypass, sliding closet door. The track is 4 feet in length, and 9 1/2 inches in width. I'm not sure what track in the correct one to purchase. If you need additional information, please let me know. Thanks! Lauren

I have (old) mirrored sliding closet doors. Each is 48 inches wide. The doors will not pass each other on the track. The bottom roller is marked Acme 4011. I believe it is uses part number 23-041 as it has convex wheels (see photo). The doors are 1.25 inches wide, including the beveled outside ... (cont.)

I recently received a sliding mirror door bottom track 23-240 and it is the wrong size. Do you have a 48" sliding mirror door track in a satin nickel finish, but the width is 3-3/4"? The one I received is 2-1/2" and won't work for me.