Viewing all customer Discussions for:

81-158 Dual Roller Assembly, 1-1/4" Steel BB

I have 2 sliding glass doors that I need to replace the roller assemblies on. They will use either 81-158 or 81-166, I won't know until the doors are dismantled. Can I order both sets and return the ones I don't need without a restocking fee?Thanks,Mark

Please help find replacement rollers as shown on attached pictures.

Hello, we are looking for the correct part for our sliding glass door. We have attached pictures of our dual roller assembly and want to confirm an order for the right part before we buy.

This looks like the correct tandem roller with the exception the wheels on my existing rollers are 1 1/2" inch diameter.

H: 1" W: 5/8" Dia: 1-7/16" (by eye, but photo says different) Also, do you know where I can get the plastic bottom track for the screen door? 92" in length.

I need to know the correct model of Swisco rollers to purchase. Attached are photos of the roller. Width is 7/10's of an inch. Height is 1 and 3/10's of an inch. Rollers are 1 and 1/4 inch. Todd.

Roller frame is 3-3/32 long X 11/16 wide X 1" tall. Twin rollers are 1-1/4" diameter on 11/16" centers. This sliding door is located at our beach cabin, less than 50 yards from the salt-water. As you can see in the photo, corrosion is a big problem for the standard steel/yellow chromate constructio ... (cont.)

I need two of the roller assemblies for my Pella Series 10 Sliding Patio Door. I also need (ONE) of the track assemblies that the rollers assemblies roll on.The exact measurements on the assemblies are: Housing Thickness(width) 5/8" Housing Length 3 and 1/16" Housing Height

Off-market door - cannot find any name or part numbers. No markings on the roller assembly that came out of the door. Thanks.

Looking for a replacement that will make the door slide more effortlessly

Simonton Slider - Your part 81-158 looks the same, the measurements are the same, but the wheels we have our 1 1/2" in diameter, the wheels on the replacement part are 1 1/4" in diameter. Will the replacement part work?

We attempted to match from you product list, but do not seem to be able to find exact match. There are no marking on the roller or the door.

Hello,Please see the attached photos of an existing sliding glass door roller. The pics have the dimensions included. I need two of these rollers. Let me know if you have any questions. Thanks!Kiel

The only sticker I see in the door says sgd r35-72x80. I put a picture of what they look like

Length 3 1/8" Width 11/16" Height 1 1/8" Wheels 1 1/8" Wheels are metal w/ball bearings Thanks Darren

Body is 1" tall, 3-1/16" long, 11/16" wide, and wheels (double) are 1-1/4" diameter, made of metal. Door is a Pella and approximately 18 years old

I need the roller assembly at the bottom of the vinyl patio door. I'm including some picture. The cage measures 3 1/2" L, 1" H, and 11/16" W. Overall lenth of the whol;e assembly is about 4 3/8". Assemblies needed is 4 because I have two doors to work on. I have more pictures if needed but I couldn' ... (cont.)

This door was purchased ca. 2008 from Lowes. I can't find any helpful numbers or markings on the door. I need to replace both roller assemblies and the track. I have attached photos of the parts with measurements. Thank you for your assistance.

The photo of the rollers were sent to you yesterday, but didn't include any measurements or photo of the screen door rollers. Therefore, please find the enclosed.Thank youEd

Hi, these are from a vinyl glass door. The wheels are white plastic or vinyl 1 1/4 inch. One wheel on each is seized. Can you tell us which repair kit and/or replacement parts we should use? Thank you. The body /width is 5/8" and the apron 3/16" white wheels are made of nylon.