Viewing all customer Discussions for:

81-158 Dual Roller Assembly, 1-1/4" Steel BB

I need to get a full set of wheels for this door. I found this sticker on the inside of the frame and I have included pictures of one of the 2 wheels I removed. I see similar wheels on your website but I don't see any with the small tab sticking up on the top, and the U shaped cutout seems to be a d ... (cont.)

I think the roller assembly is part # 81-158 in your roller list? The wheels are brass 1 1/4" What do you think?

I could not find this on your website.

I have many PGT Industries sliding patio doors which were installed new in 1988. I am in need of the roller sets for a couple of the doors. (2 for each door) I have found many online but they differ from mine in that the dimension between the end mounting 1/4-20 mounting hole and the adjusting scre ... (cont.)

We took this before we fond your sight. Very cold to take the door off again, but can if this photo doesn't work. total length about 4 inches

Need new roller set please

Wheel Diameter 1 1/2" Length 3 1/8" Height 1" Width 5/8" Metal Wheels

patio sliding door rollers deminsions roller width 1/4 inchwheel 1 and 1/8 inchlenght 3 and 1/8 inch or 4 inch to end of rollerwidth of copoent is between 9/16 and 5/8if you can help would like two rollers

I didnt make any measurements but I brought the door New in 2010 I also need the rail replacement

Got a sliding door from 1998. Don't know the brand but it is white vinyl double pane. I tried a roller that looks just like your 81-157 that I got from Menards. Didn't work because the wheels would not retract into the door enough for me to reinstall the door. I believe it's because the notched o ... (cont.)

I need a couple of replacements

This is a left hand sliding glass door for a client. I didn't take pics of the wheels in the frame. Each bracket has a metal two wheel system which straddles a metal center guide. Client states the metal guide got damaged and removed. Causing the sliding door to drag inside the bottom channel. We ne ... (cont.)

I am looking for rollers for our Viking sliding door. The model number on it says 9500. Hope you can help!

Trying to replace this roller with new

Also sticker from the inside of the sliding glass door is attached as well.

Hello, Please see the double roller part that is very hard to find. If you need the exact measurments please let me know, but I figured if you don't have anything close to this then why bother. Let me know. Thanks so much! Jared

Hello looking for the replacement rollers for my SGD-R20-95x82 patio slider. It looks very similar to your 81-158, however I do not seem to have 1 1/4" wheels they seem to be 1 1/8" if that matters or not, due to the fact of getting the patio slider back in the tract which seems tight already? 3/4" ... (cont.)

These are photos of the roller compartments on my Pella sliding door that I need to replace.Can you identify them?There were no identifying marks or numbers besides pella.Thank you,Mary

Measurements of wheel:1 and 1/4 inch Bar length: 3 and 1/8 inch (not extending with wheels) Bar width: 1 inch Holes for 2 screws Must have stabilizing bar Company:formerly known as Insulate

Hi, my name is Howard. I need to identify this part for my sliding patio door. Please provide cost for 2 rollers with shipping to CA. Also the estimated delivery time. Regards, Howard