Viewing all customer Discussions for:

95-230 K/K Screen Corner

Almond

the widest part at the corner is a half inch thick by a half inch wide and tapers down both ways to about 7/16 x 7/16 it does have a small tab on one side to go into a guide inside the screen frame. Pencil pointing towards this tab in photo.

I need help finding the correct screen corners, I went to the local big box store and purchased those little gray ones. They are absolutely not the size I need nor do they fit any of my screen frames. my house is roughly 35 years old and I'll assume all of these corners are that age ... (cont.)

If I send you a sample piece of the screen corner would you be able to help with finding a part?

Need a new screen frame corner for my house window. OD of the metal frame is 7/16". Width of the tab going inside the metal frame is 3/4" and depth is 3/8". Entire length from outside of corner to tip of tab is 2 3/8".

Hey kids, wondering if you can help identify (and supply) this screen corner. many thanks for your help!!

The square block on the corner is 5/16 inch wide 3/4 inch long on both sides. The arms are an 7/16 inch wide on the flat side. The inside of the arm has offset of 1/8 inch wide from top of the arm to the extension is 3/8 inch. The space between the top extension to bottom extension is 1/4 inch. I ... (cont.)

I need 8 of these. Please. No part number

Hi, I need to replace several screen corners for my Kolbe and Kolbe screens. I'm not exactly sure how to measure for the right size. Can you identify it from my photos? Thanks!

These were purchased original from Kolbe & Kolbe window manufacture.

We ordered item 95-034 3/4 x3/8 screen but still to small. Order 2358674. Sent a picture of old corner piece. Can you see if you have larger screen frame corner. Thank youSally

Please see the attached screen corners. Any chance you can help find these?

Looking for white plastic screen corner keys for Kolbe & Kolbe Double Hung window screens. Measures 3/8" thick and 15/16" square with the Kolbe & Kolbe logo on the key.

Hello, Swisco Customer Service, I need assistance with repair parts. I have attached two photos to help with identification. The aluminum screen frame measures 7/16" x 9/16". The corner pieces measure as follows: The "exposed" corner (the sunburned tan area in the photos) is 7/16" thick and 3/ ... (cont.)

The whole part is in the first picture below. It is the cracked one on the right The one that is too large is on the left. (Originally ordered 95-230.)

Hello I need help finding the right screen window corners to replace some broken ones on 24 year old Certainteed windows. I have 3 pics of the broken original window screen corner and also 2 pics of the screen frame to see if that is even something I can also get as one side buckled removing the scr ... (cont.)

I'm looking for two screen corners ,? I tried your 95-230 but they were slightly bigger than the frame. Like 1/16 too much for both dimensions to fit in the aluminum frame.

looking for this screen corner

Please help!

I need to replace some broken outside screen corners. I have attached 3 photos showing the style. No numbers or writing on them. Dimension are: 3/8 inch thick, The corner "square" is 3/4 inch. Total length from point to corner is 2 1/4 inches.