Viewing all customer Discussions for:

95-230 K/K Screen Corner

I am looking for replacement corners for some existing screens on our house.I am attaching 2 pictures. The screen extrusion is 1/4" x 1/2" inside dimension. The corners are 1/4" thick and total width is 5/8", but the little lip slides into a small groove, leaving 1/2" to fill the extrusion.Anythin ... (cont.)

A screen blew out in a storm and all 4 corners were damaged. The pictures show the corner of an adjacent undamaged screen

Any inventory matching these specifications? Thanks.

Only markings is KK

At top of window screen is held in place by pins! Picture may be sideways ...sorry

Hello, This is more for brand identification rather than part. I'm trying to identify what windows I have as I am in need of 2 sliding screen doors in the Forrest green color the rest of my screen frames and window frames are. All I have to go off of is a screen corner with the letter "KK". Would yo ... (cont.)

Need corners for extruded aluminum window screens. Frames appear to be .032" thick wall. .375" thick and .75" wide outside diameter. Lynn

Hi. I have jeldwen windows in my home from 2003. The plastic pieces in the corner of the screen frame that hold the metal frames together are deteriorated and they are cracking as I take the screens out to wash the windows or replace a damaged screen. I need 8 sets. 4 pieces per set for a total ... (cont.)

I need to find replacement corner key for my window screen. When I measure the existing ones they are 7/16" wide and 3/4" square. Please advise. Thanks.

The plastic connectors of my screen windows have creaked over time. These brackets hold the plastic arms. The photo shows the brand K & K. Need about a dozen. Thanks. Jotham B

Hello, I'm replacing about sixty screens in a house I'm working on and see the part numbers for the corners and the plungers. There are also pins at the top of each screen and a screen pull I don't see the part numbers for. I've attached a photo showing the parts I am looking for. If you can h ... (cont.)

Can you tell me if your 95-230 is a good fit for Kolbe&Kolbe window screens? Also, do you have them in a red color. We bought our aluminum clad wood Kolbe windows in 2005 and this was a standard color then. Can you give me a price on 50 pieces. Regards, Dick

I would like to place an order for 3/8 x/3/4 square cut screen windows. I had ordered from another company and received the wrong size. I m checking to make sure you have the correct size I need before I order. I need square cut screen window corners 3/8 x3/4" I am sending an attathment pictur ... (cont.)

The square part is an inch long and 1/4in wide. Are they still available?

Attached is a pdf with a couple of pictures of the corner piece with my measurments laid out. The only marking on the piece is K K.

Hi, Can you advise which screen corner key to order from enclosed? They are labeled as K/K, the corner dimensions (see pictures) are 3/8" by just under 1", measured exactly as 31/32". Please see picture diagrams. Thanks, Dave

I wonder if your company carries this type of plastic frame corners for window screens. Thanks. George Liu