Viewing all customer Discussions for:

58-177 Capitol Weatherseal, 6ft

Trying to identify this snap-in glazing

Part that fits in channel is. 1/4 ''two different types of weather stripping one has flange one does not. Need both the main thing is the 1/4 '' that fits in channel anything smaller just doesn't hold Thank you Paul

Hi, I am trying to replace the seals on my aluminum sliding windows (unknown brand) they are a kerf type seal. The width of the seal overall is approx. 1.5 cm (5/8"). THe widthe of the portion that goes in the kerf slot is approximately .5 cm (1/4"), the depth of the rubber going into the kerf slo ... (cont.)

I don't see a name on the window. It is bronze. Please let me know if you have a similar part or one I could modify.

I'm looking to replace my window weatherstripping that's deteriorating. I'm hoping that your company has a suitable replacement.

Swisco team, I'm looking for some weather stripping for a few older windows. Let me know if you know where I can find. As Always Thanks

To whom it may concern: We have 4 of those old metal frame windows which all the weather strips need be replaced. I took some of the old strips down and took some pictures as below, total 5 kinds *** #5 looks like window stopper piece Would you help us to identify those parts? Your time and eff ... (cont.)

The weather strips are on aluminum windows 1974 construction. Can you suggest an alternate if unable to locate?

I have an Andersen window and the weather strip is bubbling and coming off, see picture. I am looking for a replacement weather strip for this window. Thank you.

Hello, The weatherseal I'm trying to match comes from a window with an aluminum frame - vintage 1970's. There are no marking on the window frames or the existing weatherseal that I can see. It's a piece that fits on the outside and brushes up against a sliding window panel to keep the weather out. ... (cont.)

Just looking for a good replacement

I am having trouble determining which trim is the best replacement for the Alenco sliding windows. Please let me know if you need anymore pictures. Thank You

I purchased the capitol weather seal and the part of the seal that contacts the slider on my window is very wavy in sections keeping it from effectively sealing, I have included a picture. Is there something I can do to correct this or does it need to be replaced?

Replacing all parts on old aluminum windows

I'm needing vinyl glazing/weatherstripping for aluminum sliding windows in my garage. Mfg label is unreadable but other windows in the house are V. E. Anderson windows from 1964. Can you match this vinyl glazing?

I need the rubber stops(glazing beads). The rubber stops are 1" with a 5/8" "T" I also need this corner piece as well. I understand that Likit is no longer around and I am trying to find these replacement parts.

Can you please if I am able to get replacement weatherstrip for my windows. Hello, can you please confirm if 58-177 will be a perfect fit for the replacement? I have attached the pictures. Thanks

Hello, looking for perimeter window seals for a Likit window. Seems to me that these are the original seals. From end-to-end, its about 7/16", and 1/8" high. Any help you can provide is appreciated.

as the window is closed, it makes contact with bottom of frame. There is a gap at that bottom of the window. The bottom gasket is broken or missing. How do I go about fixing that?

Needing this type of glaze beading for an older style Aluminum frame window