Viewing all customer Discussions for:

58-179 Black Pile Weatherstripping, 3/16" x 5/8"

I need weatherstripping for the front door on our store in Fritch, TX. Its 5/8" width 1/4" deep. Solid aluminum (bronze)

Weatherstripping for bottom of screen door

I have a 1996 Grand Banks trawler with sliding windows, need to replace all window wool pile, which slides into the bottom of the windows in an aluminum track. I didn't take a picture of it, at first the twenty year old fuzz came out with out the plastic bottom. Then I was able to get a piece of the ... (cont.)

Hello, I've attached some pictures of the door and my business shop. Per the health department, I need to get the door gap closed and have enclosed some pictures. Could you please advise as to what may be the best to get he gap closed? We also need to replace the sweep on the bottom. Thank you! Laur ... (cont.)

I am looking for weather stripping for an Old Castle brand double doors. the crease where it fits is 3/16" wide and the brush part sticks out 1/2". do you have a part number for this

This is a weather seal that seals between 2 glass doors- the manufacturer is amaralite

I am looking for replacement stripping for double entry doors. The metal strips that hold the stripping is approximately 1/4" x 9/16". Each door is 83 1/4" x 38". There is also a strip along each mortised latch set that needs to be replaced. Both the metal strips and the insulation stripping its ... (cont.)

Can you help me replace this wool pile it is 3/8" wide by 5/8" tall

Need this material asap - roughly 10-20 ft

Looks like a half an inch channel

looking for this felt .

Is the backing adhesive?

I need the part number for weatherstrip 3/16 base and 1/2" thick pile. Thanks, Steve

I JUST RECEIVED MY ORDER 848764 58-127 3/16 X 1/4 and tried to slide it into the slot on the door. Do you carry a 5/32 x 1/4 pile that's the size from the door. The 3/16 does make but its tight it an amarlite door thanks for your help

Hello, Recently ordered various weather stripping to re-do vinyl windows. The 3/16x3/16 in white and the bubble weather stripping fits perfectly. The black 3/16x5/8 model 58-179 also fits quite nicely, but the "boss" would prefer white... Is there any option that is white in color for 3/16x5/8 o ... (cont.)

I'm looking for replacement weather stripping for this door as well some way to bridge the large gap between the two doors. the gap is close to 3/4" wide. Thank you Roger

Hello, can you please help me idenitify a replacment weatherstirp for the screens in my house? They run down tracks facing the windows which look to be about 3/16" wide. The pile is about 5/8" or just under 3/4". I've attached a few pictures showing dimensions. The windows are vinyl but the scre ... (cont.)

I am looking for felt weather stripping for 8 foot tall amerlite store front doors the felt is black.Here are the pics. Please advise.

I am looking to replace the sweep in my restaurant storefront main door. The piece is screwed into the frame. I will also be ordering a plate with the sweep included as well. My board of health inspection cited me for having too large a gap. Thank you for your help in figuring this out. -Julia ... (cont.)

I need Wool pile.170 x .350 for my slider. Can you get it in these dimensions?