Viewing all customer Discussions for:

58-179 Black Pile Weatherstripping, 3/16" x 5/8"

I have a lot of these off-brand double hung windows that have sizable water leaks. The photos show the leak area that is in the corners where the bottom of the top window seals against the top of the lower window. I have a LOT of these that are 20 years old and leaking. My temporary fix, shown in t ... (cont.)

Please indentify these weatherstripings. I need to replace both.

I'm looking for a pile 3/16 X 1/2 x 84 long for a church door.

I had purchased the 58-075 but it was too small mine needs to be wider around 2 1/2 in wide and 7ft long hopefully you have the option for me

Hello, I'm looking for a few window parts and il do my best to explain what I need. I can't find any manufacturer name on the windows anywhere but it's a manufactured home from 1999 and the windows are original. I'm looking for tensioner or extension springs that help support the weight of lower w ... (cont.)

Pella 8' tall sliding door unit. I'm looking for the insulation that slides in the groove on the sliding door of the unit. This protects wind and rain from blowing in when the unit is closed .

Two sets of swinging doors. One is Rubbair, the other is Mueller. Need to replace the bristle pile weatherstripping. Do you have replacement parts? Cost and lead time?

I have an aluminite patio door, likely manufactured around 2000. The wool pile weatherstripping is failing, the bottom flange is likely about 3/16", it seems to have an unusually long pile that is 5/8" or perhaps 9/16". I have 4 similar doors so will need 4 pieces of ~ 84". The doors were manufactur ... (cont.)

I'm looking for some pile weather stripping with a 7/32 fin and a 1/2 to 5/8 pile height. The groove the fine slides into measures .228 wide and I'm afraid your 3/16 fin by 5/8 pile weather stripping may fit to loose and fall out or pull out of the track it slides into. Any thoughts on what you ma ... (cont.)

I know the width is 3/16 on replacing the pile weather stripping but what measurement I need is the height of the pile?

need to replace weather strip with one that is "taller" It appears spline is 1/4" or possibly 3/16" would work but I would like the pile or bristles to be taller - maybe 1/2" or 3/4" tall. For an accordion style folding window above a bar that doesn't seal good enough.

Hello,I am looking for an expander or sweeper for a storm door. The first picture shows the lower part of the door with the brass expander. The second picture shows the very bottom of the door with the two strips of felt? the rest on the threshold of the door frame. I need the expander to be at leas ... (cont.)

I need to replace my weather stripping. See photo. The size is 3/16 bottom, 1/2 bulb, white. Please advise. Thanks

what is the name of the adjustable metal part where 58-179 goes on?

Hello Swisco, Do you guys carry this type of weather stripping for my front door? Thank you for your help, Sergio

1/4" fin x 3/8" knap x 7' long Fin = white plastic that slides into the door or kerf Knap = black hair that protrudes from the Fin and seals the door Looking to match what we have, we have 5 or so doors that need new weather stripping.

I'm purchasing complete channel balance (with top& bottom), The channel without attached parts is 28", stamp option is 27 C. Also I need top sash guide. I have submitted some pictures. Please let me know the parts number . Thanks Mohammad

Looking for a part number to replace door skirting. The one I ordered is not wide enough. Still have an 1/16" gap.Ordered: 58-014 : 25' Gray Skirting Pile, 1/8" x 1/2"SWISCO.com order #1165058 Thank you,Brent

I'm looking for wool pile weatherstripping for some windows similar to what is in the attached pictures, but I need it about 1/8" longer in the pile. What I have is 1/2" long pile with a 3/16" base. 5/8" pile would be better. Do you have anything like it?

Im looking for .350 pile height with .187 back in black. Anyone know where I can find this?