Viewing all customer Discussions for:

21-092 Screw Driver Bottom Pivot

Do you guys sell this circled part ?

bottom fixed door pin housing sheared were pin engages bottom door support Need new housing or entire bottom corner piece. Location : facing mirror left side bifold bottom attachment. Photos attached. Mirror bifold only has a attached tag simply stating Sunshine Mirror Any help would be apprecia ... (cont.)

Hello, hoping you folks might be able to help. Trying to repair these bifold doors from the mid 80's I believe. Rather heavy doors in various states of disarray. I have not had any luck finding hardware that I'm confident will work. Any help would be greatly appreciated. Thanks, Erik ... (cont.)

We have your bi-fold mirror doors. They were installed in around 2005. The bottom pin is loose from the bottom slide. I'm not sure if the "pin" itself needs replaced but it is no longer anchored to the round plastic glider at the bottom.Do we need to remove the doors to replace those little pieces?P ... (cont.)

PLease help me ID these parts.Best Regards,Jorge

I removed this corner block from the bottom of a mirror bifold door my question Does your 23-407 block replace mine? I would like to replace all four and would your 23-115 top pivot and 21-092 bottom pivot fit

Bottom pivot pin for a very heavy bifold door with a mirror on it

I am looking for parts to repair double mirrored buddy-fold doors. I think I need lower corner adjustable pivot blocks. These blocks are white plastic with metal spring loaded pins. I have lost the round roller / spacer that I think belongs between the bottom of the door and where the retractable ... (cont.)

As you can see, the wheel has come off the stem and I need a replacement. Can you help me with this? Thanks so much, Steve McGuire

I am trying to find the replacement for the pictured item. The picture is of a bottom rail with the pivot that is damaged. All I know is this is a Stanley door.

Track is 36" long by 1". (one of 2) Left upper pivot will NOT stay in place. Threaded screw hole is stripped. Other hardware is worn or no longer works. (Did until a few days ago) I need everything but the upper and lower tracks. I want to fix the left door and have extra hardware if the right ... (cont.)

Enclosed are pictures of the broken pivots for the bottom of the bifold closet doors Please identify the parts to order and suggest any advice Thank you Manuel

My girl friend wants me to fix her door. I need the pin and adjustment screw for the other door. She has no idea what happened to it. This is a glass bifold door. Jerry

Hi, We are in need of six new pivot blocks for the corner block pins . I think our corner block pins are in good condition wasn't sure if there should be spikes at the top or if we are missing a part could you please look at photos and give us an opinion. Might as well throw in six plastic roll ... (cont.)

Hello my mother lives in a community for 18 yrs. She is the org owner. A few yrs ago 1 dr sticks and is basically stuck. I have tried to replace the rollers and pins to no avail. What can i do? I would like to fix it for her but i live in Chicago. I come down often but dont stay in fl ... (cont.)

Cannot see any site to order the bracket I need for a mirror bifold door

The white plastic sleeve has split in half (I glued it together for the photo.) This is the bottom pivot piece for the mirror sliding closet doors. The white bracket is 2" from top to the bottom ring, the spring is 1 1/8" long, the piece with the spring around it is 1 3/4" long and has a 1/4" diamet ... (cont.)

I love your site, but I can't find another post that has this type of nylon block. What pivots, and glides will work with this? They are metal doors with mirrors.

Hi there -- What are the pins that goes inside (or compatible with) the corner block? We need to replace the block and the pins. Thanks you!

I understand that acme 17 -4405 has been discontinued. Here are photos of a 48" and 30" inch set of mirrored bifold doors to repair. I believe I could use 3 screw driver bottom 21-092 6 pivot blocks 23-181 3 bottom drivers with rollers Am I missing any hardware that you might see from t ... (cont.)