Viewing all customer Discussions for:

81-271 Sliding Patio Roller Assembly, 1-1/2"

Need to find replacements for this part. The one pictured is still in good shape, but others have corroded such that the tab that holds the screw for fastening to the bottom of the sliding panels has broken off. No names, numbers or markings visible on this part. See side view with ruler pictured ... (cont.)

Looking for a part number, and two order six of these

The rollers are concave and seems to be nylon. Diameter is 1-1/2 inches and body is 1/2inch wide and 1 inch in height by 2 inches in length. I can't seem to find this anywhere and any help is very much appreciated!

Please identify and sell us the correct sliding door roller assembly. Width - 17mm height - 40mm depth - 70mm wheel (plastic, but a metal one would be great) dimension - 36mm Thanks!

The needed roller assembly is for one of the three triple glass doors for a bedroom closet. Each glass door has two of these rollers (one on each side). The roller had a lot of thread binding it completely. After removing the thread, and cleaning it, the roller rotates but not as freely as the ot ... (cont.)

Was wondering if you carry any part that look like this

Looking for replacement part for ansi mgr code cv-1 series 600 ANSI/aama. Hs-r20, hs-c40 mst 12060/806, 101-88 Providing you with info on window sticker Home has 39 of this type of window. Many of the window wheels needs to be replaced.

good afternoon. can you help me with these? if you need dimensions let me know. thanks

Door is double-paned aluminum circa 1986, in good condition except for flat spots that developed in a couple places on steel rollers. Roller assembly screws into the bottom of the door in one place and this appears to be the only thing that holds the rollers in place on this model. Thanks for any he ... (cont.)

Do you carry these rollers? I do not know the door manufacturer.

Please identify the correct rollers I need to replace these. Width 5/8" height 1-1/8" wheel diameter 1-1/4" all metal wheels and frame.

I need to replace the attached rollers. I saw your roller part # 81-077 which have the same measurements but my rollers do not have the dimples that part 81-077 has. Do you have that same roller without the dimples.

Hi, I need to replace my track and rollers. I need 130" of track and 6 rollers. 2 roller for each door.can you point me to the right ones! My track is old style and don't know if other track will fit my mirrors doors. Thank you! I'll send pic.wheels are concave

I went to Home Depot and Ace and they don't have the same roller with the amount of adjustments that has a metal wheel most of the rollers replacements that I could find were for sliding glass doors for exterior application this is an interior mirrored glass door with a metal frame ... (cont.)

I do not have part number, only the model: SAL S HD

It looks like 81-271 will fit. Does this look correct? Thank you

I have an old aluminum patio door, double glazing, one of the roller wheel is broken. The size of the wheel: Width: 5/8 in Height: 1.3/8 in Wheel: 1.14/16 diameter

Can you help me replace the roller assembly. I unscrewed the screws and Having a hard time removing it. Need two replacement rollers.

Looking for bottom rollers for sliding glass door .

Finding many 'pretty close' matches in your online catalog but none exact. Wheel on mine looks like 1-3/4" and biggest I'm finding online says 1-1/2" diameter. If I'm replacing rollers at both ends so they match, will this matter? Is there enough adjustment to take up a 1/8" to 1/4" difference? ... (cont.)