Viewing all customer Discussions for:

32-339 1" Drawer Slide Spacer

Please find attached pictures of the windows I need a new hardware. Checking your web page seems are part 39-239B but you may know better. Please notice two of the windows has the regular crank handle and two with clerestory pole crank mechanism shown in those pictures, I would like to change the re ... (cont.)

These are parts that connect to a Brookhaven cabinet side bracket. Do you carry them??

I ordered Home Depot Schrock cabinets 15 years ago or so and need to replace the glides on this lower unit. HD was not able to help. I can get you depth measurements if you have these available to you - starting with some pictures. Schrock has "proprietary" holes pre-drilled for their glides and I ... (cont.)

I need 2 of these pieces to make my drawer work but I only have one due to the other breaking. It's about 1-1 1/2 inches. Please contact me back as soon as possible as I am trying to finish this job. Thank you in advance!

Merillat cabinetry about 20 years old.

The part that holds the sliding drawer bracket to the cabimet has broken. All other parts in tact. The screw holes that mount to the mounting strip on cabinet wall are 1 1/2 inches apart and use Phillips screws. Can't see if it's just one or 2 screws holding it to the mounting bracket. But there ... (cont.)

Unigrass 6600 is number on the roller hardware. We believe the spacer is 6195, 25 mm or 1 inch. Based on the Unigrass website the part number seems to be 86478-39.

I need a replacement parts. Thank you.

I need to replace the small brown plastic bracket in our kitchen lower cabinet. The cabinets are no longer being made and Home Depot and Ace Hardware did not have anything similar that would allow us to use the sliding drawer/shelf. Please let us know if you have a mechanism that is similar. Or perh ... (cont.)

Looking for these Mepla pantry drawer supports. The slide face is 3/4 x 3 inches wide and cabinet side is 1 1/2 x 3/4. The overall depth cabinet side to slide side is 1 inch. Part is marked Mepla 600 010 08 25

Hello: Would you have plastic replacement part that looks like the one in photo? No name or number on it or cabinet. Thanks for any help.

I have quite a few of these broken for the drawers in my kitchen. No identifiable marks. It fits the measurements of your 1" Drawer Slide Spacer item 32-339 but I wanted to make sure that product can replace the one pictured and if not what do you recommend. Thank you, Neil

I'm looking for an under mount drawer guide that will replace a Mepla 2035/572. Do you have anything like that? The measurement from the back of the drawer front to the back of the drawer box is 20.75". The measurement from the front of the cabinet face to the back wall of the cabinet is 23.5". This ... (cont.)

This is a guide for a drawer on my kitchen pantry's drawer These are kitchen craft cabinets The drawer track is 23" long that this attaches to

Hi there I am trying to identify a piece, it is from a bedroom dresser, brand name is dynamic, it is the piece that connects the sliding door to the side of the dressor.

Just wanted to find out what size euro screw fits the center hole? My current screw is much smaller and will not hold.

I'm looking for part number, manufacturer, source to buy the pictured part.

I'm looking for a replacement spacer block for a Wood Mode cabinet. The spacer is about 1 1/8" tall and is about 1 1/2" between the mounting holes. All the spacers I've scene seem to have about 1 1/4" between the mounting holes. Can you point me to a good replacement? Thanks

It is a plastic part that holds the front part of the drawer (from the side)

Hello, We had an accident and one of the front brackets holding a sliding cabinet drawer up was broken. I cannot find the exact same part in the website. Can you help me? Thank you