Viewing all customer Discussions for:

23-271 59" Bottom Concave Roller Track

need roller and track

I'm looking for replacement bottom tracks to fit mirrored closet doors. The doors are marked as Monarch 09044 915. The tracks are 60" long. They were damaged several years ago when we had carpeting replaced. Didn't notice the damage right away. It looks like they tried to bend new guides into the tr ... (cont.)

Bought the lower track. Has cut-out for 7 screws, but none included in shipment. Will probably need to go into concrete (1st floor apartment). Recommendations on what to use?

I need a 10 foot long track appropriate for the rollers shown in pictures

I am looking for a track replacement for the above. I think is a 23-256 but can't find the specs or how to order it. I need a 5 foot track section. I also need the one roller which I think is part number 23-028 but want to confirm this is the right one. Thanks

my current roller has the same measurements as 23-092, with a nylon wheel. My measure, wheel diameter 1/8, 3/4 flare, with 9/16 inches.The 23-043 diameter is 1/8 longer than my roller. Should I buy 23-092 or 23-043?For tha matching track 23-271.My door frame opening is 59.5 inch. Will 0.5 shorter th ... (cont.)

Track is 5 ft by 3 3/4 wide with two 7/8 inch tracks on it.

I have a mirrored sliding closet door with 2 sliding mirrors the bottom runner and wheels need to be replaced. Can you help me?

The house is 47 years old. the closet doors are original the ridge that the door rollers slide on is worn I need a new base 59 inches long, 3 1/8 inches wide, with 1 1/2 inches between ridges (measured from inside rail to inside). The doors with frame are 1 inch wide.

I'm looking for 2 of these railings please. I need them 60 inches long and 3 inches wide. And I need 3 of them Thank you

Hi - I have 10 feet mirror sliding closet doors and I need the bottom track. Can you please let me know if 23-242 would work with my current roller?

Hello, I have mirrored closet doors (2) and need a replacement 59" bottom track. The rollers are concave and the wheel is approximately 1.5" . Any help would be greatly appreciated. All the best, Brian

We are looking for this bottom door tracks as well top track ,with rollers Thank you

hello i need on of these top brackets and 60 inches of track for the pictured roller typemoira

Monarch lower track similar to deisel 23-271 59" lower track swiscoMonarch Chatsworth California project 835?49. 835051c #1983. con report3220

As you can see, this track is in bad shape. The wheels are fine. They are concave. I am thinking 23-272, but I can't tell how big the opening is for the wheels. The door opening is 60"

We have sliding Closet Doors using N-6630 rollers on a bottom track of approximately 3.5" wide using a grooved roller. I need 2 tracks at 72" long and 2 at 60" long.We have only owned this house for 3 months and do not know the source of the original parts. Do you have the tracks? Jack ... (cont.)

Hi we need to replace our closet door track, I have attached pictures of our current track. I think product code 23-271 is the one we need can you please confirm this? I really appreciate your help and time, thank you

Hi, this is Rubi G. I need to replace track and rollers on my John sterling mirrored sliding closet door. size that I need is 101" long.

During a remodling project our mirrored closet door track and bottom rollers were lost. Can you help us find replacements? I am including a photo of the top roller as well as the space where the bottom roller used to be installed. The screw holes are about two inches apart. We'll need a bottom track ... (cont.)