Viewing all customer Discussions for:

91-054 Nylon Slide Bolt Pair

Plastic pieces that hold window in track broke

the plastic piece that clicks in place to hold the window up. They're cracked on multiple windows.

Needing 8 latches

I am renovating an old house and these storm window latches are broken and wont latch.

Looking for parts for these old single pane windows. The bottom locks are @ 4" long x 1/2" wide. The white corner clips are @ 1 1/2" long x 1/4".

I have sucessfuly used your part number 91-054 slide bolt on storm windows. A storm door uses a simular slide bolt but has a rectangular protrusion extending from the angled latch end. Are these slide bolts available?

Looking for these sliders and retainers.

Hi, checking to see if any of your storm window latches will fit. These are Philips Window latches

I look for Nylon Slide Bolt ( item 91-054) and also inside spring with retainer matches to it. can you help confirm the item 91-003 is the right one matching with 91-054? Thanks! Ken

I need to replace the pin in the storm window. How does it come apart and do you have the pin part

Here's info on screens I need parts for. One frame is 31 1/2 w by 22 1/2 h and one is 31 1/2 w by 18 3/4 h. The OD is 3/8 and the ID is 3/16. I need screen corner inserts for three frames and latches for two frames.

Hello Swisco. Attached photos of my storm window type on an old farmhouse. These windows are minimum 50 years old. Photos are of the only intact one I have, to show you the intact hardware I need, nylon latches and top slide tabs. For the other storm windows of this type, these parts are broken. Pl ... (cont.)

For a kitchen door window (2 windows) that slide up and down.

I need the top corners and the bottom slides for 18 windows. Also, do you have a Tutorial on how to get old clips out

I'm looking for old window screen white plastic lock part? Thank you GNJ

Need a finger pull/latch identfied for a storm window system.

I have doors made by National Nail corp. The Plastic 3/16 x 3/16" pivot corners and slide locks are missing. see attached photosDo you have replacements ?I am also missing an entire window. Need frame parts.

We have storm windows in our house they have no name nothing to identify them and most of the corners are of them are broken

Looking to replace 2 top corner brackets which have lost the tang which keeps it in the frame track. Additional photos are for aid in identifying purposes.

Hello, please help! I need a few tilt latches, I think that's what they are called. As you can see, the head on the left side is broken. They are about 3 1/2" inches long and just 15/32 high. Can somebody help me find those. They are probably very old :-) Thank you! Susie