Viewing all customer Discussions for:

81-165 Tandem Roller Assembly, 1" Steel BB

Hello, I need 4 replacement rollers for two United series 3131 vinyl patio doors. These doors were installed in approximately 1991 when the house was built. Photos with measurements are attached. Can you let me know which replacement rollers I should select? Thank you!

I need 4 new rollers . ASAP

Need the rollers and keeper (see photos) for glass patio door

Sliding door roller with top screw attachment point Need assistance identifying exact model number because this does not attach from the end rather through the bottom, the screw attaches to the sliding door from the top of the roller to the bottom of the sliding door frame

Hello. I can not find the manufacturer on my door. I have attached photos of the existing rollers. Are you able to recommended a replacement?

I need to replace the roller for an exterior sliding glass door. Just want to make sure I am ordering the correct part!

Need replacement rollers 3"x1" casing 1" diameter rollers

5/8 wide 3 1/8 long 1in dia. Rollers 1in tall

Hi, I'm trying to identify which roller is closest to mine. 81-138 looks extremely close, but the width is not quite right. Is this the best suited one? Thanks!

I need help identifying this part. I believe I have found it but am hoping for confirmation.

Hello, I would like to know if you have exact type of the slide door wheel for 1 inch only. If you look at IMG-1662.jpeg on the top there is a hole to screw it to the bottom of the door. This is for series 3500 ANS/AAMA 101-93 SGD-R15/SGD-C20 MST: 8080/100610 glass door. Also let me know if I buy ... (cont.)

I need to replace the rollers in my patio sliding glass door. The issue I am having is the rollers measure at 1 1/4" but it is really difficult to get to rollers over the railing. I tried buying replacements at Home Depot but I can't get the rollers over the railing and they rollers will not attra ... (cont.)

length 3 1/8 inch; top to bottom 1 inch; width 5/8 to 3/4 inch; no flange. Plastic tandem wheels

Looking for 2 replacement rollers. Width 5/8, wheel diameter approx 1-1/16. Overall length 4-5/8. Thanks.

comes from an IGA sliding patio door

L = 3 1/8" W = 11/16" H = 1 1/32" Roller Dia = 1 1/4" Roller W = 5/16" 2 Wheels

Hello,Sorry no manufacture name or numbers anywhere on door or rollers. Has 1 inch wheels so was thinking your part no. 81-165 might work. Any suggestions?Thanks Rick

I need two new rollers for my slider. Door is 1984 model. No markings on the hardware.

I have been to Lowe's and Home Depot found similar product but was 1 1/4 roller and 1" roller. Need 1 1/8" rollers a pair.

The door has no markings or number, the rollers seem to be about 1 inch in diameter. Thanks for the help!