Viewing all customer Discussions for:

39-253 LH Mobile Home Operator

1972 Champions mobile home , with this style side crank out window , I have tried some jalouse brand cranks . But they don't close the widow all the way tight . They look the same but the widow stays open a inch ( the gear on the crank stops dead ) I don't want keep buying trial and error to see if ... (cont.)

How do I take out this part?

Looking for that window opener please see attached and the handle that works with it.

Do you have this replacement part or something similar? The handle broke off the crank part.

On the 39-253 - What sku is that bottom arm (underneath the dual arms) that is attached to a track underneath the window? I will need the sku #'s for the hinge its attached to and the track underneath the window. Thanks!

Window crank for a 2000 Forest River Cardinal 5th wheel on the right side of the window

I have some older louvered style windows in a shed that I need to find replacement crank handles for and possibly the geared operator that the handles attach to for some of the windows. I measured the splined shaft that the handle attaches to and it looks to be very close to 5/16 diameter. It also ... (cont.)

No markings or numbers is 2" by 1/14"

Both of these cranks are shot. I'm unsure of the make or year. They are out of a very old slide in truck camper. The largest one operates the door window. The window is approximately 4 ft long and 1 foot wide. The other operates the main window beside the table. It is approximately 1.5x 3 ft. Any h ... (cont.)

I have several windows that no longer close by turning the handle. The dual arm operator appears to match 39-235. The problem appears to be that the teeth of the gear sprocket on the dual arm operator drop below the teeth of the gear sprocket driven by the sprocket the handle turns when I attempt ... (cont.)

Windows will no longer close all the way by themselfs, you have to go outside and push them the rest of the way closed. Handle just spins when windows are still 4" open. I assumed it would be the gear box, I need 2 of these and they measure from the outside of the tab that connects to the window ar ... (cont.)

Looking for this part

It's about 3" long with a screw at both top and bottom and about a 2" long opening for part of the casement windowMany of these pieces are cracked in our office building. Only the ones that are broken have slightly obstructed the closing and thus caused people to turn the cranks (Milgard 39-253) an ... (cont.)

Stamp marking "I L C" I am trying to replace all window operators and crank handles as I rehab the entire home. There are 21 windows like this throughout the house.