Viewing all customer Discussions for:

23-086 Mirror Wardrobe Door BB Roller, Concave

do you have a replacement for a COX 21-717 21-767, believe it to be concave and sending pictures of rail as well in order to confirm. would like with BB if possible.Thank you in advance. Ildiko

Where can I buy this 1 1/4? nylon wheel size

I need to replace the wheels on my closet door. With the wheels I currently have, the holes for the screws do not line up vertically. The top holes are a little bit more to the center than the bottom holes. By looking at item 23-081, I can't tell if the holes are lined up vertically or not. If t ... (cont.)

Double bypass no idea of brand but they are brand new with damaged wheel

We just sent back the ones we ordered from you. They were too big. Product code was 23-064.

I need the top and bottom of this door ,, the top has to open gaps 1?5/8 And bottom of you Can it?s a two door so whatever that size is .. silver color like we have in pic When you reply can you reply all and if you have questions call my wife

Needto order pic above Say cox 21-717. 21-767

Huh. I don't recognize this wheel assembly. Being that it doesn't have any markings or numbers, it could have been made overseas. We have the 23-086 ball bearing wheel assembly, which may be able to be adapted to your door. What do you think?

T have wooden mirrored doors. I have a 1 1/2 cut out to fit the roller assembly to fit in. I need more information on the measurements of the 23-070 to see if will fit my doors. Thanks,Fred

2 pictures of bottom roller and one from top of sliding mirror. Possibly from Cox

I'm looking for 10 rollers as seen in image 3706/3711. I also am looking for 4 rollers seen in 3710. These rollers are 50 years old. Replacement parts would work just as well I'm sure.

Please see attached, I checked 23-086, 23-028, 23-070, 23-081, 23-064, and I cant find a perfect match to the rollers I have. I need to buy 8 rollers that look like the photo attached. The measurements are 1 1/4 inch wheel diameter (white part of the wheel edge to edge, 1 7/16 inch apart verticall ... (cont.)

Hello, It is the correct track, I want to replace the concave rollers with BB. In my photos, pay particular attention to the bottom screw holes; they are offset, unlike your Product Code 23-086 which are in-line. No one seems to have the roller hardware with the offset holes. Not sure about drillin ... (cont.)

We have three mirror closet doors 8 feet high. The track is 10 feet long and has a convex track that takes Cox 21-717, 21-767 concave rollers (6 of them). The present track is badly bowed and rollers have chunks missing on them. We are having difficulty finding anyone to help us. Can you please advi ... (cont.)

I need a quote for the following picture attached

I Cannot find the specific part. instead i bought 23-086. I want to know if it's fit.

I need to replace The bottom rollers on my mirror closet doors. Attached are photos of the existing rollers. The concave wheel is 1/14 inch diameter, the bracket height is 2/12 inches, and the width is 3 inch.I would appreciate your opinion of what would be the best replacement. Walt M ... (cont.)

My Cox rollers have the same number on them but they don't look the same. What parts should I order

Söker 2 st Hjul för spegeldörr på de jag har står det COX 21-717 + 21-767 hjulen är konkava plasthjul I'm searching for a quantity of two wheels for the mirror door that I have. They say "COX 21-717 + 21-767." The wheels are concave and plastic.

The wheel on the roller assembly popped off and it cannot be put back on. The assembly has two pieces; the part that gets screwed on to the door and the part that slides onto the first piece into place. I searched everywhere on the mirror doors without finding any numbers or markings. I attached mul ... (cont.)