Viewing all customer Discussions for:

23-088 1/4" Offset Closet Door Hanger, 7/8" dia.

We bought a house that has wood sliding doors in bedroom, bathroom and hallway. Not one door is working properly and I want to try to keep the doors. The doors are 1 5/16" thick so the standard track at the home improvement stores are not wide enough for the doors. I'm looking to replace the ro ... (cont.)

The bracket for sliding door is1inch high and 1 3/8inch wide. The roller brackets are 1 1/2 inch wide, 1 1/4 inch high. Wheels are 7/16 -1/2 diameter offsets of wheels are 1/16 and 3/8. Looking for these parts.

Has Stanley 1 number stamped on it. Would love to have a replacement part that would work

i need new rollers for my sliding doors Can you help me locate the correct ones Thank You

I have two closets with sliding doors. The rollers are missing from one set of the doors and they are worn on the other set. I was not immediately able to identify the correct replacement rollers as I looked at your online selection. It would be helpful if you could recommend replacement rollers tha ... (cont.)

These closet door roller(s) pair is A Front 1 3/8 -Rear 3/4 & B Front 3/4- Rear 1 3/8. Made by Medalist mfg. Please exam. These picture of roller's are a pair A & B . I've contacted Medalist mfg in Pella,IA. by e-mail, the reply from an Alan Getting Director of Sales. Read I'm sorry not our ... (cont.)

Looking for a bi pass roller 1 1/8 " wheel and 1/4 off set

By pass doors, inner door

Pictured is the one roller I found on door. Need two, other is missing. Nylon roller is 7/8". This example has roller tilted, but I think a straight roller or a roller offset some to rear would work. Forward offset, as available retail, results in interference with rear door. Part is marked TENNATR ... (cont.)

missing one roller pictured. Plus the bottom metal bracket that goes into floor (and plastic insert) that separates the doors. possibly Andersen. thank you

Track is roughly 1 inch deep x 2 1/4 inches wide.

This is from a set of doors that are hung. We have two other sets that need these exact parts. So I need 4 brackets total. I included a photo of the track which shows the slots for the wheels which are three-quarter inch size. The doors are 1 1/2 inches wide.

3/4" roller and ? 1/8" offset. I had ordered some rollers from you but not to my perfection as for as the fit.

Good afternoon,Looking for replacements for this Medalist FRONT 1 5/8 REAR 3/4 piece with 7/8" diameter. Want to order 2 to keep things symmetrical.What would you recommend?Thank you and greetings,Jaap

The rollers have worn out on the rollers at the top of the doors. I have included four photos, the first of the roller with the word "alliance" and number "1002A", the second and third photos are of the other roller and have the word "alliance" but the number "1001A". The offsets are different. ... (cont.)

Attached is the picture. It is Offset Door Roller. Let me know if you have it. Thanks