Viewing all customer Discussions for:

26-424 Pivot Bar

Our sliding door no longer stays in place i.e. it drops. This metal piece (see photo), fell out. We are guessing it might be a pivot bar. We are uncertain of the replacement part/size/length Not sure if the attached pictures of the window can help in its identification. Thank you in advance for ... (cont.)

Do you know where I can get these for my windows lot of the pins are broken off and I can't find anywhere or is there a replacement pin I can use?

This is the bar a sash window pivots on. I need 20

Window pivot bar

I have a window in a rental property with 2 broken pivot pins which I need to replace. There is no name or manufacturer listed on the window or the pins and no markings of any type. I have been to several home improvement stores with no luck on finding pins. Pictures are attached. Thanks! ... (cont.)

need metal'nail'and pivot shoe that holds the spring in place on the side of the window. The pivot shoe also allows the window to pivot into the room.

Hello, can you help identify what kind of pivot bar is in the picture? Or which pivot bar best works with the parts 15-218 and 15-220.

The picture with the spring and the latch at the bottom of the right and left side of the window? I know there is a broken part but not sure what we need to order. As far as that top section of the window this part is broken and I can remove the piece on the right and left on the top which needs to ... (cont.)

Width 9/32" Length 2 3/16 Head Width 13/32"

This is in regards to a Polybau window.This little pot metal oval shape end piece screw on the bottom of the window and then fits into a slotted piece in the window side channel. There is one on each side of the window.Just bought an older house and this one piece is broken causing the window to not ... (cont.)

I need help to identify this part from the window guide area.

The pivot bar is 2.5 inches long the holes are roughly 3/4 and 1 3/4. Do you have this particular part or something close that will work? Picture included

Carefree mobile home window pivot pin

Identify this part or interchangeable.

Need 2 ea spring & pivot balance shoe assemblies. Measured 25 " from upper screw to top of shoe. Will also order pivot bars.Thanks in advance.Chuck

I thought the 26-424 might be a good fit for my double wide mobile home. But it didn't work. My original pivot bars have an F shape. What do you recommend?

Looking for a carefree pivot bar the window was manufactured in approximately 1997 or 98. Measurements are, from the shoe end, is three quarters of an inch to the first hole, first hole to second hole is 1 in, and total length is 2 and 1/4 in.

No part numbers

I have 1 window with the same shoe and bar set up and need both shoes and bars replaced what shoe and bar combo will fit the window

Looking for stem replacement that attaches window to balance channel