Viewing all customer Discussions for:

26-229 Right Hand Tilt Latch, 2-1/8"

TILT WINDOW INTERNAL LATCH AND RELEASE LEVER WITH WIDE 1" LEVER NUMBER/INFO ON THE LATCH SAYS PAT. PEND. 10657 L IF THIS IS NOT AVAILABLE, WHAT WOULD BE SOMETHING CLOSE THAT WOULD WORK?

I need a replacement for a Reynolds thumb releases to match these

trying to find this tilt latch and sash release lever. Windows are 15 to 20 years old.

LH & RH surface latches,3 1/4 length,2 1/16 hole to hole,1 3/8 wide,5/16 thick,3/4 hole to sash edge, curved edges along lengths. Thank you

Locking mechanism that holds the tilt in and tilt out function in place for cleaning. No Model Numbers available on the window.

we have nylon tilt windows with these latches that keep breaking. I can't find any numbers or markings on them or the windows.

Boreal left and right hand window stops

UniFrame brand residential windows I need the retaining clips that keep the window from coming inward, holds the window in the frame. Home was built in 1989 Help! Thanks

Please see the pictures I sent you for the part that I need

I need a part Can you offer some assistance.

I found an illustration matching the part i need to replace the part was described as a "vinyl window tilt latch, it's a plastic 3/4" sliding latch that allows the movable dingle-hung vertical-sliding insulated window pane to tilt( pivot.) for removal and/or cleaning.

I am in need of finger latches and I believe the one pictured above is what I need I included a pic so you can see what I am talking about Can you give me a price I am going tp need about about 2 dozen but would like to just get one for now to make sure I have the right thing Thank you for your h ... (cont.)

I have tilt windows with moss 3-90 stamped on them. The house is at the beach and almost every pivot bar has rusted and broken. The sash shoe is blue. I need help with getting the correct bar and should I replace the shoe? Also need to replace the tilt latch at the top of the windows. Thanks for yo ... (cont.)

I have ordered sash release levers 26-001 with no luck so I am emailing you a few photos and measurements of the one I have and maybe you can help that way.

Need Tilt Latches for Mastic WIndows. DO you have a part number and cost?

We are searching for replacement window parts for Reynolds Windows. Attached are photos.

Please see attached pictures.

The latch is an internal and slips inside the side of the window. Length with recess latch is 3 1/2" Length of just housing without the recessed latch is 3 1/8" Width is 13/16" and the thickness is 3/8" Please let me know if you have a replacement....thank you!

Window latch is broken off at the tongue that touches the sides of the window jamb. Broken and unbroken latches shown

The part is from a Uniframe vinyl window. I'm guessing the window is about 10 years old. It is on the bottom window.