Viewing all customer Discussions for:

26-435 Tilt Latch Pair, 2"

I am looking for TILT LATCHES for my vinyl widows. They measure exactly 2" from screw hole to screw hole. The entire latch is 3.5"long.The numbers on the back of the latch is H-786-LH on the stationary part and H-783-LH on the movable portion.Anthony

Need to find the right size lock for my windows

The latch broke this morning when we opened the window for cleaning. The entire part is 4" from end to tip of catch. The screw holes are 2 inches apart

Hello, I have attached 2 photos of a broken window latch in my house. Both are currently broken on the window, and I’m trying to find a rapid replacement. I only have a picture of the top and bottom of the latch, without a picture of it installed, as it is broken. The latch recesses into the t ... (cont.)

3" length, 7/8 wide 2" between screw holes, 5/16 thick. Cream or ivory in color.

3"x3/4 tilt latch

I don't see any name, numbers, or markings on the latch. This latch is different in terms of that there is a screw gap for the screw holding the corner together.

Just need about 10 right side and 10 left side

i am in need of several tilt latches for general aluminum double pane windows. I cannot seem to find a suitable replacement part. Any help in this matter is greatly appreciated. Thanks, keith

Crew working in my house took out a window to bring in a ladder and broke the old clip thing that allows you to drop a window for cleaning. I cannot find the correct size online. All too wide or offset is too wide for 24 year old windows.

Looking forward replacement tilt window latches

I need two of these... one for the left and right sides. Also in need of a Head Expander for a 38 1/2 x57 replacement window TTT. White grids 6 over 6

Snapped off the latch part and need replacement. 2 inch apart screws

Would like replacement tilt window latches shown above for GA windows

I need to order a few of these window locks. Please let me know what the part is. Thanks

No marking. Got the window from Thermosash. They said they have no idea how to get replacement parts. A few years ago I got the part I needed from you. It fit perfectly and I'd like that same part again, for a different window. I can't afford new windows and I'd never buy anything from Thermosas ... (cont.)

Hello, I have multiple Silver Line aluminum tilt-sash windows, installed new in my house when it was built in 2002. Some of the latches have broken in either the plastic housing or the spring-loaded part that projects into the window channel. I need to replace these latches. The latches are 3" x ... (cont.)

I have three of these windows, photos show two of them. The window latch and tilt-in latches need to be replaced. There is also some damage to the window frames, wondering if there's a way to fix the vinyl there. Lastly, at least one of them is missing a balancer - is it possible to find a replaceme ... (cont.)

i found the spiral balance part but not sure which shoe plate and latch i should select. please help

We are preparing our house to sell and need to ensure all windows are in good working order for the inspection. We've already ordered and installed replacement spiral balances (and the tool to load them). Very simple, following your online videos! A few tilt window latches are broken, but I can't ... (cont.)