Viewing all customer Discussions for:

26-275 Window Slider Limit Lock

I have old (Summit) vinyl windows. The string broke on the metal piece that allows the window to raise and shut, so it doesn't work or sit straight in the frame. I need one new metal side piece with attached spring. I also need multiple plastic stops as are shown in the fifth photo. The window with ... (cont.)

Little tab to stop window broken off Three units broken

Almost all security stops on our windows are broken, looking for replacements.

This is a plastic piece that is attached vertically to the fixed window and you pull out a tab? This is 2 3/4" long with screw holes at 2 1/4". Thx!

11 parts are broken. Can you help me replace them?

Where can I get new ones?

Looking for these limit locks to our windows

1. Sliding window stop; screws onto the window frame inside. The tab flips down to stop the window about 4" open. 2. Vertical window stop; inserted into top window. Pops out to stop the window from opening more than about 3". Same manufacturer.

Can you identify this part and where to get them please?

Do you carry this?

In the bathroom I have a side sliding window that had a little plastic piece that would lock the window open so no one could slide it all the way open. I need to replace the side locking in place keeper

Do you have this sliding window lock or something like it? Thank you Roger

Looking to replace the security stops on my windows. 6 Total.

Sliding window lock for a Traco Window unit. Distance between screw holes is 1 and 7/16ths of an inch. Assembly is 2 inches long by .25 in wide and .25 in high. Images show a broken assembly -- rotating lock part is normally held in position by unit when secured to the frame

We are having a hard time find (6) Weep Hole, and (1) Anti Lift lock for this window. I attached pictures of window.

A small square post that tilts down to prevent a horizontal window from opening more than a few inches has broken off this part. For a white viny window.

I currently have 7 of these in my cart but I threw away all of them plus the screws.I kept 1 without screws to get correct size. the 26-275 are the right size. Do you know if you have any white painted screws on your sight that fit these?

When engaged, this part projects a small tab of plastic into the path of a window preventing it from opening further. After heat and sun exposure, these break readily when the window operator opens the windows with the tab in the down position.

I have vinyl tilt windows that were installed before I bought my house. Some of them don't work very well, and seem to require some parts replaced. I can't find any markings on them, except for 'INE 96' on the inside of the aluminium part that holds the glass. A websearch for that lead to a forum po ... (cont.)

These babies keep the slider from opening all the way for safety yet will keep window open for fresh air.