Viewing all customer Discussions for:

58-201 Swinging Door Compression Foam Seal, Large

I need black color replacement Measures 69 inches

I need to replace the weather stripping for four sets of double outswing doors, all of which are 8' in height. The larger weather stripping shown in the photos goes around the perimeter of the doors. The smaller weather stripping goes on the astragal of the doors

We have 1980's Anderson windows with Leaf Style Weather Stripping. Do you think you Certainteed product would work in lieu of Anderson?

It's 3/8"x1/2" on the 90° and 3/16 of an inch by a quarter inch and 3/8 of an inch on the flaps can you please tell me what kind this is and if y'all have it I need about 200 ft

What is the size of weatherstrip portion that covers door.? They make two sizes but can only find 3/8 x 5/8" Kerf style.

I have white in-swing, both sides open, Jeld-Wen patio doors that are solid wood with a covering that I assume is steel. The markings are NFRC 100/200 Series Doorcraft Steel W/E door MST 3068. The doors are 34.25 inches wide with a 0.75 inch strip attached to the right hand door. The height of the ... (cont.)

Hello,I am trying to find the correct replacement for weatherstripping on exterior doors. I have included an image here. I have previously purchased replacement weatherstripping that did not fit correctly.Thanks for any input,Aaron

I have Kolbe & Kolbe Ultra Clad in-swing French Doors and I need to replace the weather stripping. Attached is a photo of what is on there now. Thank you!

Door was installed 2002. CUIFD6068 maybe the ID. Looking for the bulb weatherstrip on the threshold.

weather strip on the door jamb

I believe you have the correct weather stripping I need for my very old Pella French doors. Please let me know correct item numbers and I'd like white please.

I want to replace the worn out Kerf weatherstrip with new white weatherstrip. I will need 5 lengths. I'm guessing the lengths are 82" or longer. Thanks,

I need new weather stripping for a Kolbe door. Here is a side profile picture.

The snap or Kerf width on this old piece of stripping is about 1/5 inch vs the 1/8 clip or Kerf width I'm finding. I can't find the size I've explained anywhere. Please help

Jen weld casement windows. Not sure which weather stripping to buy

Looks like the top is about 1/8 inch

The weatherstripping on our threshold is rotting away. It is a Pella door but the part is on the threshold. Any ideas?

Hi. Can you help me identify what type of weather stripping I should use to replace this current one?

Trying to find replacement weatherstripping for front door. Cording slides/locks into door jamb. See photos. Thanks.

This weather strip is about 1/2 the size of a off the shelf leaf weatherstrip from Lowe's or Home Depot. The rigid leg is about 1/4 inch, the leg that lays against the door is about 3/8 inch and the leg that seals to the door is about 1/4 inch. The original pieces are 8 ft long. I have contacted the ... (cont.)