Viewing all customer Discussions for:

58-201 Swinging Door Compression Foam Seal, Large

This is a kerf style weather strip but not a typical one as it slightly smaller and has smooth rubber pad. This is off a patio door at the threshold (bottom of door seals against it). Door looks similar to a Pella but is not and I cannot locate any mfg identification even on the glass. Piece need ... (cont.)

Hi, I am looking for a match or good substitute for the weather stripping on my caradco patio doors. The doors measure: 1 3/4 inch by 34 1/2 inch by 93 inch. Above I attached multiple images of the stripling and doors. Let me know if I can provide you with anything else.

I'm looking for the weather strip for my patio door. (The key in the photo is just to let you know how thick the mount track is. )

Looking to replace weather seals on two eight foot by 3 foot external doors. Looks like wrapped foam. Brown in color. Thanx for any help in identifying a replacement. Bob Ottolini

We are looking for Black Q Lon vertical weather stripping. Doors are manufactured by Jeld-Wen Epic Clad Outswing. Picture attached is a cut sheet showing the part number and the dimensions of a piece of grey q lon.

Hello a have to replace this weather gaskets for a customer please get back to me as soon as possible just need someone to tell me the code of each gasket so I can Order, I believe they are Kolbe doors and need the complete set. Thanks Peter

How do your weather seals compare with the factory models? In some cases I still see light coming through which I assume air can come through. I would like to find a thicker type of kerf mounted seal to eliminate this issue.

I'm trying to identify the proper weather stripping replacement for two of my doors.One seems to have a Kerf insert and the other some sort of round foam insert. Both are made of foam.

I need a Kerf for a door gap of 12/16" to 13/16" The door is metal and the Kerf length is 3/8". Do you have something that can help me?

My weather strip is 1 1/4 wide Brown Need replacement part Thema Door

I uploaded a photo of exactly what I need alomg with the specs of the door. Do you have a replacement - Thanks, Paula

Hi. I cannot find any weatherstripping that looks like what I am trying to replace. The kerf part is round and a 1/4 inch diameter. The worn out V part of the strip is thicker than the new stuff for sale in local stores! I should mention that it is 34 years old, which is the age of my house. Hopeful ... (cont.)

Can you please let me know if you have weatherstripping to replace that pictured in the attached?

Please help me locate this. Thank you. Ryan M

Cat destroying vinyl covered foam door weatherstripping. Need to replace. Can you help, please. Thank you.

I have 18 year old Stanley exterior doors and would like to get new weather stripping. The problem is there is a very wide gap and the weather stripping must have the correct "tongue" to insert into the gap so that it stays. Is there anything like in the attached picture available? Thanks ... (cont.)

Your Swinging Door Compression Foam Seal, Large - Product Code: 58-201. This seal has a 5/32" kerf. Do you have a similar seal with a 1/4" kerf? If not, can you point me in the right direction? Thank you.

none

This weather-strip may be 10-25 years old. It is made of foam covered with a plastic-like cloth. Using the cross-section photo, the top is 1/4" wide and fits into a 1/4" wide groove in the molding that is 1/2" deep. The top to bottom measurement of the cross-section as pictured is 3/4". It is 1 ... (cont.)

I've been unable to find replacement kerf weatherstripping for my door - the size is the problem - it is about 3/4 inch in diameter, as shown in the picture.