Viewing all customer Discussions for:

32-146 Rear Mount Fixed Socket

Does part 32-146 have two dowels or pegs on the back, that fits into holes in the back? I'm looking for a backpltae / rear socket that looks exactly like the picture in the pot above?

No identifying numbers any any of the slide parts

Looking for help to find the plastic bracket on the back.

I am looking for two replacements for this rear mount slide guide socket for one of my kitchen drawers. It looks and measures like your product number 32-146 except mine has two plastic prongs in the back that are inserted into holes drilled into the back wall of the cabinet. The prongs are top to ... (cont.)

This part holds the back end of the drawer side guide to the back wall of the cabinet.

Part number on holder H-1041 No manufacturer name on part Need 3 sets

These brackets are from an older Grass side drawer mount system. G 6601 is stamped on the part. The size of the base is 1 1/8" x 1 3/4" and guides 7/8" high. Right and Left needed. Hopefully you can locate or have a suggestion for a substitute.Thank youFred

Does your 32-146 have the two locating pins on the back like in this photo? Thanks!

Hello, I have a drawer bracket that broke. It is supposed to hold the metal slide that attaches to the drawer. What replacement piece should I get? I'm including pictures of the broken piece, and the piece that is still in the cupboard attached to the other metal slide. Thank you for any help. ... (cont.)

hey, Few of these plastic brackets are missing, they used yo hold 5he sliders from moving, can I find matching? thanks

Just need to figure out what type it is since I can't find it in any hardware stores. If you could figure out the name and model number and possibly where to purchase it, that would be great!

Can you help me identify this piece? Don't know where to find a replacement. Plastic cracked.

Looking for drawer socket rev 2009

Leftside one broke. Need a new one.

This is the back bracket that holds the drawer rail at the back of the cabinet. The bottom part of the plastic bracket is broke off allowing the back of the rail to drop. Both sides appear to be identical, and both are broker off. Newer house built in 2014, but could not find any name or company ... (cont.)

I cannot find this backplate. It has two knobs in the back of it.

Looking for 32-146 rear mount fixed socket with two little pieces on the back of it. See attached photo.

center guide socket, inside square measures 3/4" by 3/4" and depth is 13/16" what can you find? I see a rear mount fixed socket part #32-146 that may work if I trim the depth Was hoping to find something like #32-001 that has a 3/4" opening. Thanks Look forward to your reply Steve ... (cont.)

This is used as a rear drawer guide for a pots and pans drawer. Thanks!

New construction i 2013. The cabinets are Armstrong, and the plastic socket does not use screws because it attaches to thin wood on an island. The part says c-367 on it, and it also says made in USA, and has a little picture of Texas and Tennessee on it.I can't seem to find one anywhere, and one of ... (cont.)