Viewing all customer Discussions for:

90-075 Sash Lock with 1/2" Deep Throw

Looking to replace 2 of the 3, of these latches for the large glass pane of an iron entry door. The latches allow for the glass portion of the door to swing open inside the house for cleaning.

Good morning, please see the attached photo. I need Linford brand window locks. I do not have dimensions, and I can get them if necessary.

Hi, purchased the above item and is plastic lever, won't hold sreen window up, old was metal and broke, need help finding part. Thanks

Metal window latch/lock....seems super straight forward and universal. Metal logo says "GA." Looking for part number...

I purchased the 90-005 sash lock which looks and installs great but the tab isn't long enough to go all the way under the glazing of the top sash rendering it somewhat useless. Is there another model with a longer tab?

Need some help figuring what part number you have that matches this. Took this pic today; These are old metal windows. I'm thinking 90-005 is the match but wanted your help

Hi,I need to replace a small glass block window lock. I can send you few pictures if needed. Please let me know which part# should I order.Thank you,Peter

I am trying to find replacements for these latches on aluminum windows. They are mostly broken. Metal substitutes would be great as the plastic breaks too easily. Thank you.

Hope upon can help with my window latches. The photos depict one glued for photo purposes , one showing the portion broken off that seeds into the other window channel, and the last one with measurements hopefully accurate.

Hi, I'm hoping to get help identifying the appropriate replacement channel balances for two windows. I've attached a set of photos of one of the channel balances. As seen in the photos, there is a stamp on it, 2740. I measured the length at 28". I will need four identical channel balances in all a ... (cont.)

Help with identifying parts on your website. Window lock measure 2-3/4 long and pivot bar 2-1/2 I see there are two pivot bars that length. Which one matches my window? Thanks

The sweep part is 0.133" thick. I have tried a lock similar to 90-005 but the sweep is too thick (0.15") and won't close all the way. Are there other products with thinner sweep? Also the original part is made of plastic.

Hello I am looking for the plastic sash lock in the pics I have uploaded

Looking for a similar lock with a 1/2" tongue. 2 1/4" screw holes are good.

similar to 90-005 looking for a sash lock with 2 1/4 installation holes but with a 5/8 locking tab

Do you sell the hardware that goes with the 90-075 1/2" deep throw sash lock? It's the part that the throw fits into.

I need a window lock similar to the 90-005 but with a 5/8" throw. Does anything like this exist? All dimensions for the 90-005 work for me with the exception of the throw. Needs to be 5/8". Thanks

Hi I need to find a replacement part for the window sash lock. Width between screws are 2-1/4" standard. However, I will need something close to 1mm in order for the extruding lock portion to engage with the window. Most common one I found are just half the way reaching the window frame. I found the ... (cont.)

will 90-075 traco sash lock fit on nuair window picture looks good

I am hoping to find a METAL replacement part.