Viewing all customer Discussions for:

82-086 Legacy Keyed Handle Set, 3-15/16" (1-1/8" to 2-1/2")

The handle to the locking mechanism of my sliding glass door broke. Can you suggest a replacement part?

There is a sticker on my door with '5800' listed which brought me to your website. Door: 1 5/8" thickHandle/Face plate: 9 3/4" x 1"Lock/latch: 11 3/4" x 3/4" (looks like 82-265)Strike: 10 7/8" x 5/8" (looks like 82-249) I would like to replace the handle and multi-point lock with face plate. Will ha ... (cont.)

I'm sorry, I can find any names or markings on the door. It was installed prior to us owning the home

Need replacement locking handle for Champion brand sliding door that was installed in 2011. The door is white vinyl but can't seem to find a model number. I can upload pics of the door and handle mounting area if that would help.

I want to replace this with on that has a key lock on the outside. I bought a 82-086 from your site but can't get it to work right. Is there something else I need?

I need the correct doorhandles for the sliding glass door with outside lock mechanism

11 3/4 height , 11 inches center to center, face plate 3/4 wide, handle set 9 1/2 tall, 4 inch screw holes center to center, off set cylinder, multi point mortise lock, Need two locks and handles

We bought the door from Lowe's. Hopefully, the picture of the label on the door will be helpful.

Afternoon, it appers a spring has broke on the D340398 latching mechaninism. Can I replace part of the unit ?Looking forward to hearing from your company.Thanks

I need a handle of the door as it broke. Please let me know how we can obtain.

As you can see by the picture, what I would call a cylinder nut broke off inside the door and the screw can no longer hold the handle in place. I was able to get the nut out but looking for a new one. No markings on the door of a brand.

Looking for a Plygem sliding glass door handle- it looks like the screw holes are approx 6 1/4 on center

Hello, I am looking to buy a handle that has a keyed lock on the outside. I have attached the sticker and measurement photos. Can you please assist?

I need help identifying the white exterior plate that the handle attaches to. I also need the bolts/spacers that go with it. Length: 8.5", Width: 1", Distance between handle holes: 5.5"; Distance between fastener holes: 3.75". Markings on inside; SASH CONTROLS FERNDALE MI and 22650 TAIWAN. THANK YOU ... (cont.)

I need to buy this exact part for my sliding patio door , both sides

Exterior of patio door handle broke at screw post

I need a replacement handle / latch for this Jen-Weld patio door. What do I need to order?

Looking for the replacement lock only. Handles are good 12" hole pattern. 12 1/2" total length

Cannot find any names or numbers on the parts

This is a keyless lock that needs to be replaced. The latch on the inside does not latch, can this be switched out for a lock with a key?