Viewing all customer Discussions for:

58-170B Foam Filled Weatherseal,12ft

I have two Milgard opening casement windows circa 1995 and the weatherstripping has degraded. I don't see any part numbers on the inner corners of the windows between the panes, but there is a sticker that says: MFGR: MIL-027-1 SERIES: 5420-C MST: 5-3 x 8-1 MVT: 61" x 33" Are you able to determin ... (cont.)

Can you please confirm whether the photos are of item 58-170B. If so, I will need approximately 340 inches worth. Is 3 rolls sufficient? Once confirmed I will submit my order. Thanks, Jim

Hello Swisco Do you have this weather stripping ? Or something close? Send me a couple options if so ! Thanks so much

The door is a Milguard (pretty sure), fiber glass. The trim is W shaped vs T shaped. The bubble tube thing is filled w foam. I also need the lower trim for the same door.

Hi Further to the below...not sure what happened to all my email text. But, the top tang which inserts into the window frame is 3/16" wide. The plastic I beam , if you will, is 1/4" high. The seal is angled for a crank out operation and is encased in vinyl with foam interior. I think 58-170B may ... (cont.)

Please help me identify and replace the weatherstripping for these custom wood casement windows. Pics show windows with weatherstripping and after weatherstripping was removed. The rigid piece inside the vinyl is 1/4" wide. The lip on the rigid piece is 1/8" and the entire weatherstrip is 5/8" t ... (cont.)

Weatherstripping for vinyl windows. Would be on the exterior the window would slide up and down against the seal

This is kerf-type weather stripping for wooden casement windows, basically Andersen knock-offs with no brand name on them. It is foam filled, with cross section about 1 inch X 5/8 inch. Need a part number, thanks.

Hello Which one of your weather stripping would I use to replace Pella proline and Pella architectural series casement windows. The windows were installed in 2001 if that helps. Thank you This is the profile of all the weather striping on all of our Pella windows. Please let me know your thought ... (cont.)

I need to replace the outside seals around my bow crank windows. I looked on your site and didn't find any that looked like this. Will you be able to help me find replacement seals? I installed this window about 20 years ago. I ordered and replaced the window latches from you last year. Keith ... (cont.)

Old casement windows (20ish years old) need replacement weather strips. No brand markings to be found. Searched the internet for replacements without luck.

Have a casement window that has deteriorated original weatherstripping and we need help figuring out what best replacement.

Hello - Trying to replace the weather stripping on my patio door. The door does not have any identification on it; we think it is either a Pella product or an Andersen product. The weatherstripping itself has a QLON label. Pictures show size/shape.

Looking for 12 feet of weather stripping for Marvin Integrity double hung window. Serial number on window says 17424163 NFRC 272 CG-6 05

See pictures.

Hello, I'm looking for casement windows weather stripping. Please see attached picture for profile and size. Thank you.

end profile 3/8" width 1/4"

I need to replace these seals Please help Thank you

We are refinishing these casement windows and are looking for weatherstripping options similar to what we have. Attached are pictures of dimensions and of the weatherstripping and the casement jamb.

1994 Kolbe & Kolbe internal swing patio door: looking for the exterior seal that attaches to bottom of door and seals against the sill/threshold. See photo and drawing. Dimensions on drawing are approximate as the old seal is very worn. Do you have a potential replacement? 58-170B perhaps? Thanks ... (cont.)