Viewing all customer Discussions for:

39-253LB Encore Dual Arm Operator, Sill Mount

Hi there,I need new crank mechanism for right side. (opposite side from picture.)Thank you.Kirk

Looking for a window crank replacement for a kitchen window. The crank has a marking of "Truth" and the handle says "Caradaco". The mechanism itself is about 5 inches long. The part of the crank running parallel with the window is about 5 inches long. The long arm is about 10 inches. The curved arm ... (cont.)

I have 2 vinyl windows that need crank mechanism replacement. One opens right, the other left. It appears they are from the same manufacturer. The only identification that appears to be branding is on one handle. Please let me know what you can about manufacturer, model and replacement cost. Thank ... (cont.)

Hello, I'm just looking for what type of crank assembly I need to order to repair 2 windows. Thanks

I cannot find what make of windows these are. I am hoping you will be able to tell what model they are by the hardware that needs replaced. This is a large picture window with a left and right crank out. They are both wore out and need replaced. You can see in the one picture that the sprocket porti ... (cont.)

I've replaced the handle but am still having issues closing the window. The handle doesn't catch properly and I believe the whole mechanism requires replacement.

The gear drive on the Hurd window regulator is stripped and will not close the last 2", has to be pushed or pulled closed

Need for both a left and right window application but the gear on existing operator is centered - not sure what replacement part to order.

Question: to replace this part, do I need the regular 39-253LBor the Low Profile 39-438B? And what other parts go along with it?

We need a left and right window crank w/hardware

There are no markings that I can find on the crank itself. The only marking I can find is on the window itself. C-L C25-36x72. Pictures attached of what I need. Let me know if I you need additional info.

Hello, Im looking for an operator in replacement of my 1496-320. Do you have one that will fit. Thanks

I'm attempting to determine which operator this is. I was uploading photos of it disassembled, when your site either crashed or refreshed, and deleted them. In case I don't have to disassemble the whole thing again, is there any way to determine which one this is? I believe it's a 39-253LB, but can' ... (cont.)

Hello I need casement operators for Hurd windows from 2000.

I need to replace the hardware and casement operator. Currently the operator was made by Bonnieville. The arms are stamped with Truth. That's all I've got.

Hi, please help to check whether this replacement is available or not. Thanks.

Hi This crank no longer catches along the teeth/wheels and I am trying to replace it. The window was installed in 2000 by a contractor during a renovation so it may be off brand/no label. There is no name on the crank or the window that we can see, only the number (part number?). The arm is 4 inc ... (cont.)

Can you confirm if this is a 39-439B?If not can you identify it?I need just one ASAPThanks,Ed

Need to replace this window crank from ~2002... looks like it might be a Milgard window? I can measure the window dimensions if needed...? Or even remove it before taking another pic.

I need a right & a left of this part.