Viewing all customer Discussions for:

32-056 11-3/4" Self-Closing Drawer Slide Pair

I need the slide part of this track for both sides. Where could I purchase those?

Drawer guides are 11 3/4 long

The slides are a littler longer than 11.5 inches. Please be sure to inform me if you have the slides or the black little object behind them.

I'm looking for a plastic round roller wheel that fits on the botton of the drawer for a metal desk. It's about 3/4" and center is empty.

The first photo is of the one I don't need to replace but I need something that can on the other side, which is the second photo of where the roller disintegrated. Yeah, it's a riveted roller. But I think if you have one that's about this size (1/2 inch diameter by 3/8 inch width of roller) with a s ... (cont.)

Looking for a Saratoga Springs kitchen drawer glide 7-1/2

Sorry for the quality of the pictures (I am not a photographer!). The roller is .50" diameter and is .25" wide. I don't know the "axle" diameter as it is staked and have to destroy it to dis-assemble. I notice you have rollers with axles that are threaded. If something like that is available ... (cont.)

I AM LOOKING FOR THESE DRAWER SLIDES/GUIDES FOR A CUSTOMER. THEY MOUNT ON THE SIDE OF THE DRAWER. LENGTH-8" WIDTH-3/4" THICKNESS-3/8"

Kitchen cabinet drawer assembly. The rollers are approximately one quarter inch wide and 7/8 inches in diameter. Could go to 1 inch diameter is anything like this available? Thank you

TWIMC, The little wheels/rollers came off the side of a dresser drawer. The drawer itself has heavy duty metal sides (6" x 14-1/2") and the drawer front, back and bottom are wood/MDF. There are plastic brackets attached to both sides at the top back, where the metal sides meet the wood back. Thes ... (cont.)

I have a bathroom vanity with a drawer assembly that has a pair of 1/2" (Outside diameter) wheels that fit into a metal track. The wheels (one on each side of the bottom of the drawer -- in the very back) are attached to back of the drawer with two staples. I would very much like to locate a pair of ... (cont.)

I need a few replacement nylon rollers for my drawer slides. The rollers I need are 7/8 inch, with 1/2 inch holes. The first picture is of the drawer slide without the wheel. The second picture is of a complete drawer slide. The third picture is of the broken wheel. I would appreciate any hel ... (cont.)