Viewing all customer Discussions for:

32-056 11-3/4" Self-Closing Drawer Slide Pair

2 1/2 in. Long 1 3/4 in wide (kitchen). No Model #

I have ordered several replacements and not have been the correct size. The issues I've had is they are too narrow for the slide to get into the bracket. There is no markings or any identification on the part. If you could help I would appreciate it.

This opening for the slide to fit in is 1.25" All of the new ones I find at hardware stores are 1" or 7/8". Can I find this size anymore? Cabinets are about 20 yrs old

This is from a dresser made by Vermont Tubs in approximately 2003. The mounted piece is 10.5" long and the slide part is 16" long (not extended). There seems to be a plastic part on the bottom that has failed. The drawer will not catch and stay closed. Image 9452 is an installed piece on a closed ... (cont.)

This is a plastic drawer slide guide that goes in the back of the cabinet. The metal slide goes in the plastic piece. I do not have the name of the company that installed the cabinets nor do I have the name of the cabinet as these were installed when the house was built. Kindly let me know if you pr ... (cont.)

The top set is from a pull-out drawer in kitchen. The bottom set is from a drawer in our den. No part numbers are displayed on the parts. These are both from cabinets installed in 1991. Can you help me to determine as to which replacement parts I need for the sockets and glides if necessary. ... (cont.)

i pretty sure my cabinets are from Medallion and are about 28 yrs old. The plastic has cracked and in need of replacement. Note: they have a "slot" on the bottom that the track fits in.

My drawer left slide(facing my drawer) got bend I need an replacement part with screws .. bend slide has Unigrass 6600 mark on side and 5 G on the other side.

The drawer guide attached to the drawer, the Plastic roller wheel broke off. Need to replace two.

I need the slide part of this track for both sides. Where could I purchase those?

Drawer guides are 11 3/4 long

The slides are a littler longer than 11.5 inches. Please be sure to inform me if you have the slides or the black little object behind them.

I'm looking for a plastic round roller wheel that fits on the botton of the drawer for a metal desk. It's about 3/4" and center is empty.

The first photo is of the one I don't need to replace but I need something that can on the other side, which is the second photo of where the roller disintegrated. Yeah, it's a riveted roller. But I think if you have one that's about this size (1/2 inch diameter by 3/8 inch width of roller) with a s ... (cont.)

Looking for a Saratoga Springs kitchen drawer glide 7-1/2

Sorry for the quality of the pictures (I am not a photographer!). The roller is .50" diameter and is .25" wide. I don't know the "axle" diameter as it is staked and have to destroy it to dis-assemble. I notice you have rollers with axles that are threaded. If something like that is available ... (cont.)

I AM LOOKING FOR THESE DRAWER SLIDES/GUIDES FOR A CUSTOMER. THEY MOUNT ON THE SIDE OF THE DRAWER. LENGTH-8" WIDTH-3/4" THICKNESS-3/8"

Kitchen cabinet drawer assembly. The rollers are approximately one quarter inch wide and 7/8 inches in diameter. Could go to 1 inch diameter is anything like this available? Thank you

TWIMC, The little wheels/rollers came off the side of a dresser drawer. The drawer itself has heavy duty metal sides (6" x 14-1/2") and the drawer front, back and bottom are wood/MDF. There are plastic brackets attached to both sides at the top back, where the metal sides meet the wood back. Thes ... (cont.)

I have a bathroom vanity with a drawer assembly that has a pair of 1/2" (Outside diameter) wheels that fit into a metal track. The wheels (one on each side of the bottom of the drawer -- in the very back) are attached to back of the drawer with two staples. I would very much like to locate a pair of ... (cont.)