Viewing all customer Discussions for:

32-059 17-5/8" Self-Closing Drawer Slide Pair

I am looking for a replacement Merilkat side drawe slide with the L shaped end. Do you know where I can find one?

These pictures are from a drawer that still is working. We need these 2 glides to replace ones on a drawer that no longer works. If these pictures don't give you a good idea, let me know.

I have a 21.75" drawer with Unigrass 6600 slides and I need to replace the slides and the accompanying cabinet rails. The cabinet depth is 23.5". Please recommend what replacements I need. The existing cabinets have a plastic rear Mount extension bracket. You can see the rollers on the existing ... (cont.)

Need replacement drawer glide

Hope you can help, we need both lengths drawer glides 17-3/4 & 20-3/4. 4 sets of each. also need 8- 1" plastic spacers to hold glides at correct width

For kitchen cabinet drawer. Need the opposite side roller assembly. Right side when face drawer front.

currently have only the drawer insert in attached photo, want to add more using the 32-062 glide

Trying to find replacement hardware like this or similar. Must have a back bracket to attach to the back of the cabinet

Tried numerous other ones and the bracket keeps the drawer from closing the whole way.

I need 4 back plates. Info on the piece Mepla 543.000.30.02

I have slide measures 1 1/8 inch wide has a lip goes to 3/4 width without lip need plastic rear mounts

this was put in in 1983-1986 on the drawers in a apartment kitchen,

Looking to replace this part in an old kitchen cabinet drawer.

Looking for replacement with soft closing feature or just replacement ones for broken ones if others are not available or too expensive.

I have old shrock kitchen drawers and the plastic back plate cracked. The track has a width of 1 inch and the it seems that the plastic back plate is 1 1/16 inches wide.I called Shrock and they no longer have any parts.The glide is 21 1/2 inches long and the back plate is 3 3/4 inches and the tra ... (cont.)

Hello, I'm looking to replace a box drawer for the Fairfield Square utility drawer by Timberlake. I am told by the builder of the home that the company is Timberlake. I have the faceplate and just need a new box drawer. I believe that the dimensions are 18 1/2 depth 7 7/8 width and 3 7/8 height. ... (cont.)

Hi, I am looking for the other side to the roller shown. THat is I need a Drawer Left assembly (DL). The one shown is Drawer Right.

We need 4 of these plastic parts/tracks) which the drawers slide onto. Need to know where to order, or look, for these. Thanks

I have new drawers I have to replace in a home. The original drawers were tossed. They were installed with unigrass6600 sliders. The original installation is in tact inside the cabinets. What I am missing are the parts that have to be on the sides of the drawers. Where can I find these sliders so ... (cont.)

I need a few replacement slide rails.