Viewing all customer Discussions for:

32-060 19-3/4" Self-Closing Drawer Slide Pair

Attached are 3 pics of what I need. It is a Grant 336 CL. 20" track length. The ball bearing wheel is pressed into the frame so I'm figuring I will have to replace the entire track as well. Let me know what you recommend for a replacement since I can't find the exact match anywhere. Thanks, ... (cont.)

Hi. I have two kitchen drawers with broken roller wheels. The cabinet rollers are stamped Unigrass 6000. They are white, 20" long and are 3 1/4" tall. Can you help me with replacements?

I am trying to find a 3/4" wheel that I can attach to left side of these pictures where the wheel is missing (original was put on with a rivet but I need a screw based one now). Alternatively I could purchase a new set of rails if you have 20" with the L-shape at the end (I have not been able to ... (cont.)

20" Drawer Slide.

What diameter is the nylon ball bearing wheel? I'm looking to match an old chemistry table and the wheels are 7/8" diameter on a 20" long slider.

Total length = 20.5 inches Drawer Slide Wheel is about 9/16th of an inch diameter. This drawer slide is mounted on the outer edge of the drawer but the slide and wheel mechanism is on the inside of the drawer - not the outside. The "valley" is 7/8 inch wide and it is slightly over 1/2" de ... (cont.)

Looking for 20" drawer guides and what cabinet guy calls boots

I have german (brand = Lager) kitchen cabinets about 25 years old with deteriorated drawer slide rollers. I would like to either replace some of the rollers or the complete slides (see attached jpeg image). The rollers are 3/4 inch in diameter and 3/32 inch wide with a rivet hole about 3/32 inch. If ... (cont.)

TWIMC, The little wheels/rollers came off the side of a dresser drawer. The drawer itself has heavy duty metal sides (6" x 14-1/2") and the drawer front, back and bottom are wood/MDF. There are plastic brackets attached to both sides at the top back, where the metal sides meet the wood back. Thes ... (cont.)

I have a bathroom vanity with a drawer assembly that has a pair of 1/2" (Outside diameter) wheels that fit into a metal track. The wheels (one on each side of the bottom of the drawer -- in the very back) are attached to back of the drawer with two staples. I would very much like to locate a pair of ... (cont.)

I need a few replacement nylon rollers for my drawer slides. The rollers I need are 7/8 inch, with 1/2 inch holes. The first picture is of the drawer slide without the wheel. The second picture is of a complete drawer slide. The third picture is of the broken wheel. I would appreciate any hel ... (cont.)