Viewing all customer Discussions for:

32-062 23-5/8" Self-Closing Drawer Slide Pair

The slide is craked and the draw sticks.

I tried to upload a picture but it wouldn't allow me. I need the piece that attaches with pegs into the back of the cupboard and holds the drawer slides up and stops it.

I am looking for a replacement part for a kitchen drawer rail. the part number on it is 565/22.25R 17002-86. It is 22.25" long, and has a 13/16" diameter plastic roller wheel.

Hello, I would like assistance please: I need to add side rails for this drawer. They are 22.5" long and extend 4" past the drawer. Any info you could provide would be awesome! Thank you.

there is a G stamped on the slide, nothing on the socket, Someone said it was a Grass unit, i called them, they gave me your contact info. Looking for replacement sockets

Need new side rails and the tracks for kitchen cabinet drawer.

I was recently given a dresser "Impressions By Thomasville" the draws are a death trap. I'm thinking i need the hardware that connect the drawers and dresser and allow them to slide. Would rather have someone come and do that for me, but i doubt its an option. Drawers dont slide out they fall out ... (cont.)

I'm looking for the mirror image match for this roller. This is from the right rear of the drawer as seen from the back. I need its mate, to go on the other corner, so the roller projects to the left side of the drawer (as seen from the back). All it says on the bracket is "GRANT DR." I've been to ... (cont.)

The back mounting bracket broke. Cant find.

I need to replace the small brown plastic bracket in our kitchen lower cabinet. The cabinets are no longer being made and Home Depot and Ace Hardware did not have anything similar that would allow us to use the sliding drawer/shelf. Please let us know if you have a mechanism that is similar. Or perh ... (cont.)

Hi Cabinets were installed in 1995. Haas Cabinets. As you can see from the picture, there is a round insert that fits in a metal connector which is riveted to the back of the cabinet wall. Do you have this part and or a recommendation for a replacement. Regards Brian

I'm looking for a drawer socket to accommodate the narrow flange that reaches down from the bottom of our track. We have several drawers that are failing.

I'm looking for an under mount drawer guide that will replace a Mepla 2035/572. Do you have anything like that? The measurement from the back of the drawer front to the back of the drawer box is 20.75". The measurement from the front of the cabinet face to the back wall of the cabinet is 23.5". This ... (cont.)

Need this part

Bottom slide that is attached to the drawer

Need replacement sockets for 25+ yr old hardware that has 1 1/4" tall drawer tracks. Do you have sockets that accept these older (and larger) tracks? Seems that current standard is just 1" tall.

I need 2 sets of these roller slides

Replacing a Unigrass 6600Hi Swisco,Spoke to Tim a few weeks back and he suggested that I send photos. Attached you will find photos of the railing on the inside of the top dresser drawer and then the photo of the railing on the drawer side. I took a shot of the far back of the drawer just in case yo ... (cont.)

KV 1284-3

I have two different drawers. One is 22" and the other is 21 3/4" deep. The cabinet is 22 5/8" deep inside. I need replacement parts for two drawers of each depth.