Viewing all customer Discussions for:

39-451 Encore Truth Operator Cover and Handle

I could not find this exact Truth casement crank anywhere ionline. I also need replacement white gasket for these casement windows which I also need. (Not sure how many feet I need yet.)please let me know if you have these items.Thank you.Jonathan

Can you please let me know what part I need to buy to replace this awning window operator? The internal gears are stripped and I cannot close the window completely. Thank you.

It says truth on the arm.

Hi there, can you help me figure out what part I need? This is a Milgard window. I believe the part we need is called an "operator". It is completely rusted/frozen/locked up in place. We may have stripped the crank, it turns freely but does nothing. I am an unskilled homeowner, but am planning to hi ... (cont.)

Hurd brand on the crank and 14DN99P imprinted on the interior part. Dimensions are 4 7/8 inch on the short bar and 5 inches on the crank measurement

Truth hardware 41011 on straight arm 31876 on pivot arm hardware off 2000 model thermo tech casement. Looking for 6 LH and 4 Rh operating

Casement vent window is 19"x13". Rivet for scissor crank broke. No markings on unit to identify brand, model, or part #. I need your help identifying what the replacement part would be for the entire crank unit.

I see that you have a very similar window operator fromTurth hardware the Encore Dyad Sill Mount, but the one I have the arm is 5.5 inches and the one you show is 4 7/8s. Can you help me find the correct one?

Looking for replacement operator

I am renovating my kitchen, and I had a new awning window put in, but we didn't consider the interference of the crank with our faucet. I was wondering if I can buy a replacement cover for the crank mechanism on the window and a new crank. I have a couple different thoughts. One is to use a twist/T ... (cont.)

looking to replace window crank and arm it says truth on it

Hurd casement windows 2000 vintage. Need both right and left operators.

I need the attached part. Do you have it to order it? Thank you

I need this operator 41011 truth

On main body.... "Interlock assa abloy" Thanks.........

Need to replace this arm #30905 on arm I believe it was 5" on the curve part and the under straight part

I believe the operator is the dyad sill mount and have found this on your site but am still looking for the hinge. The fixed base of the hinge that mounts on the sill is about 13". The non sliding arm is about 7 3/4". I need both LH and RH. Thank you for any assistance.

It looks like Roto Dual 39 341 and 39 342 will fit my windows. There is also a 7 inch hinge on top and bottom of windows. Can you give the part numbers for these hinges? Thank you Rich

Hi Swisco, The picture is of the right casement window next to the left casement window I'm trying to find an operator for.

Need all parts to replace operator and crank to match same on adjacent window. Another form was submitted and photos may not have been included. Any questions text or call. John