Viewing all customer Discussions for:

82-030 Sliding Patio Door Handle Set, 3-15/16"

The handle on my sliding glass door broke and I need a replacement. Please advise part number and a resource to purchase a new handle. Thank you, John

Need new handle and inner lock. Called door places to get fixed and was told they cannot find a handle for my measurements

I'm wanting to swap out the door handle on my sliding door. There is already a latch in the door, the mounting screws of that seem to be of the 3.5" size. Do I have to purchase the mortice lock, since this isn't a new installation? I was going to use 82-086....that will fit my existing mounting hol ... (cont.)

5820170 is my lock number or latch I need to replace that and then I need to find out what kind of extruded aluminum I need to rebuild my outer door and I need new door handles for my double sliding door and I would like to get an external key lock for it

I'm looking for a new handle and locking lever. Here are some pics. Measurements: Center of top hole to center of bottom hole is 2 3/4 inches Center of top hole to center of 2nd hole from top is 1 1/2 inches Center of 2nd hole to center of 3rd hole is 1 1/2 inches. Depth of the hole in the side o ... (cont.)

based on the patent number on the existing MORTISE LOCK (see the attached picture) part number is 82-211. However the keeper is a different design. Would it work in my case? Also, can you help to identify both sides handles (similar to existing - see the picture) and compatible lock cylinder. ... (cont.)

Looking for the part

I ordered 82-107 because it had broken off but when I went to install It and checked the mortise as recommended it doesn't turn so looks like that needs replacing too Looking at my photos what mortise do I need? It is 11.5" long and the holes where it was screwed into the door are 11" apart. Also th ... (cont.)

Glass door 2 one opens easily other hard to open I don't know what to fix? Both doors need complete set with lock and keeper. Thank you

Dear parts department, I am trying to replace a white broken patio door handle and locking mechanism: the handle cover itself is 8" long the handle is 6 3/4" the screws are 3 5/8" on center the door theickness is 1 5/8" the lock mechanism is 1" wide and 12" long (screws are 12" on center). ... (cont.)

Hi We bought a house and the patio door didn't have a handle on it. We found a tag in going to add a photo. I'm looking for a handle in white.

I'm looking for the locking mechanism to this sliding backyard door. Would you be able to help me find this piece?

I have an existing sliding glass door (pictures attached) and I'd like to either add an external key lock to the existing hardware (there is a punch out?) or replace the hardware with a compatible door lock that has an external key. Lock is double mortise with the hooks facing inward, windows in t ... (cont.)

Hi. We're in need of a new locking handle for our Guardian sliding glass door. The door measures 72 x 82, and is tempered. Sending you an image of the serial number for identification. Thanks!

I have PPG Hderculite patio door need a handle lock. I have attached a photo shows that their is gap of 111/4 inch long which handle I should buy.bob

Hi, This is for a piece of the sliding wooden patio door I posted about on D249408. This is the handle with locking mechanism with text: "HandlePatNo.3596954" printed on the inside. I have the inside handle, but not outside handle. I'd like to get both inside and outside handles Barry ... (cont.)

Have older pella slider would like to add exterior key ability if possible Please advise

NEED INSIDE DOOR HANDLE WITH TOP THUMB LOCK, ALSO OUTSIDE HANDLE

The door handle on my patio door will not operate sometimes. I have to work with it to get it to move so I can open the door. I noticed the lever to operate the latch is very loose. I don't know the manufacture of the door handle is. If you need additional information I will be glad to supply it ... (cont.)

4"long, .5" across 1 and 1/8" deep. The insert is 3 and 1/8" long 3 and 7/8 from outer screw hole to outer screw hole. The part that moves the lock on the handle is also bent. The part that turns the lock "claw" is 1" long. Thank you very much