Viewing all customer Discussions for:

32-082 Heavy Duty Kenlin Socket

Usually, the following method works: Stand in front of the furniture, place a hand on each end of the drawer front, stand back and pull. Pull straight out. Once the drawer has come past the stop feature, it can be removed. This is what Kenlin recommends. However, different manufacturers use the Kenl ... (cont.)

I purchased the desk and chair from Badcock Home Furniture July 9, 2021. The slides broke 2022 and I cannot use the drawers as designed. The guides were white and wide enough to slide back and forth on a one inch wooden bar.I do not have a picture of the guide.However there is no company name on the ... (cont.)

Hello I have several of these end sockets with snapped off edges. What are the replacement options? I see 32-082 will that work for this dresser? I also need a new metal track for one drawer. I dont see that shown with this socket. Thank you

Hello, First, thanks for shipping so quickly. I tried installing the 32-082 to replace those in the picture, but they don't fit. I'm not sure if I'm not pushing in hard enough but the 32-082 does not fit flush on my drawer. I watched the video, but it didn't show how the socket fits into mate. Did ... (cont.)

I'm thinking about removing the plastic from the original metal housing I have, and purchase the 32-081 and insert inside the original metal housing.Do you think this will work? Is the 32-081 plastic the same thickness 32-082? Thank you

The photos are of Kenlin drawer slide plastic parts from Lexington Bedroom furniture. I have 2 that are broken and will need several pieces. Please verify, if possible, these match some that you sell.

Hey Guys, Think I found the track guides I need to replace for some Stanley bedroom furniture (Kenlin case runner 32-076 & drawer socket 32-082), but I need to replace the actual metal tracks as well. Most are kinda bent like the one pictured. Do you carry them as well? Thanks, Jim ... (cont.)

Hello, I have a Broyhill dresser from 2003 and need replacement drawer guides. Measure approximately 4.5 cm wide and 3:5 cm deep. Any help is greatly appreciated.

Hi, I need a set of rails - one to mount on the underside of the drawer and the other to mount inside the drawer opening of the dresser, that go with part numbers 32-076 and 32-082. If you don't have those specific rails, can you recommend a similar kit that includes the socket and runner, for a 15" ... (cont.)

Looking for this drawer guide. It says it is a Kewlin & pat pend but no part number. This is on a Armour bought 15+ years ago.The large whole for tracking is 1 1/8 inch wide. I think it may be part 32-082 or 32-081, but did not see measurements.

Need 5 slides

Hi, I need the brown plastic piece that sits on the end of the dresser cabinet. Cabinet is a tall 6 drawer Thomasville Impressions line. Thank you.

what are the dimensions of the part in the picture left side; it looks exactly like the part I need to replace

Can I use the Kenlin 32-081 or 32-082 to replace this type of under drawer sliders? They are all broken. Do they come in multi pack plus plastic stop piece?

I am looking to replace around 5 of these drawer sockets. I am unable to locate them in the hardware stores. I believe it is a 32-081 after watching your youtube video. And I would like to replace it with the heavy duty socket. Thanks for your help in identifying the piece I need. ... (cont.)

I am redoing an oak 6 drawer Thomasville dresser and took most of the brackets off, as they were rusty and didn't work well. Thought I could easily replace them, but that's certainly not the case!! Have been to the Big Box stores, kitchen & cabinet stores, Builder's Supply and NO ONE has anything th ... (cont.)

I have the 32 081 sockets and they are all broken and need to be replaced. Can I substitute with the 32 082 sockets without getting into any other issues? The bottoms of all the sockets are broken off and was wondering if the metal surrounding the socket would make them less likely to break. ... (cont.)

This bracket fits on back of an old chester drawer. The other brackets on the set are part numbers 32-076 and 32-082. Would like to know if you have replacement. Thank you. - Paul

I have a Lexington single dresser # 336-22 and need replacement parts. The drawer stop on the lower drawer has broken and the drawer falls when opened. The first photo (3317) are the broken plastic stops, 3316 is the part they broke off of (I believe) 3315 is the track on the bottom of the drawer it ... (cont.)

Has "Antillon" on outside part. No part number anywhere