Viewing all customer Discussions for:

81-236A 1-1/2"dia Nylon Concave BB Wheel

Hi, I'm looking for replacement rollers for my mom's sliding glass door. The aluminum glass sliding door has two rollers and uses a pin through the door Nd the roller to lock into place. Do you have anything for this

No markings

1 1/2. With a 1/4 INCH BORE..I NEED

I have attached 3 pictures. There are two rollers per door.

We have unique rollers here for the screen door portion of what I believe are Kawneer doors. I could be wrong. To note, they screw in from the top as well. So I have to remove the rail of the door to get to that screw. Any help finding replacement parts would be greatly appreciated. ... (cont.)

Measures 2" tall 2" long and 5/8" wide wheel is steel and approx 1-3/4"

The wheels are marked Killian Syracuse New York. The door was installed by Erie glass company. The whole assembly slides into the door and the one notch sits on the door while the other is held in with a plate that's screwed on.

I am looking for this roller for sliding door. I have attached pictures below. Please let me know if you need any further information. Thanks Lisa

"ID" on metal part Plastic wheel "PAT. DWB -32 S&S BEARINGS" We need the part on the fotos to change it. All wheels are broken.

I have older custom made mirrored doors for my closet but I needed to replace the rollers. I went online and was able to find the wheels, but when I tried using them they did not fit. I made sure that the part that slips in was round and matched the bracket and was not the square ones. I want to eit ... (cont.)

Wheel sliding screen door

Dimensions shown on roller assy photo. Markings on nylon rotor "Syracuse NY Killian Toronto Can", no part no. observed. Inner race on 1 roller turns hard with roller, other roller not bad but want to replace both, doors about 50 years old

Trying to find this roller (2) . There is no adjustment on this and just a drift pin that holds everything together. if you need more information please let me know. Don

I have a patio door with an unusual roller. The height is adjusted with an inserted aluminum piece that rolls over an angled shim. The shim (or wedge, or cam, or whatever it's called) has a flat side with Do you have a replacement for this wheel assembly?

We have 12 sliding doors that have become difficult to slide because of flat spots and wheels no longer turn. The doors are 12-13 years old in an island environment. Do you sell such a door part?

Closet door is brass and glass. Not sure of the plastic roller is replaceable or if I need a new unit altogether. Case is appox 0.58" wide, 2.32" long (looks to be adjustable), and 1.05" tall. Unsure of roller diamter but has a marking of C-Co on it if that helps.

This is for a mirror wardrobe door roller

My wheel assembly is identical to the 81- 020 but the wheel is nylon instead. Do you have a model that has a nylon wheel with the same dimensions? Thank you Douglas.

Hello. Doors have two stickers on the back indicating... 1) Guardian Industries, 16CFR 1201 CAT II, Z97.1 1984, and 2) Fleetwood Aluminum Prod. Inc. Doors measure 78-1/4" (H) by 57.0" (W). Wheels -- what's left of them -- measure 1-1/2" diameter by 5/16" width. Any assistance that you can provide ... (cont.)

I'm looking for a replacement for a broken patio door top roller. The screen door hangs from two rollers mounted on the top of the door. The bottom simply has a plastic guide that fits around the bottom track.