Viewing all customer Discussions for:

33-071 #6 x 3/8 SS Pan Head Screw

Do you have a replacement for this shoe?

My shower sweep needs to be replaced. It's 23" long and the drill hole on the inner part of the seek is 3" from the end while the drill hole on the other side is 3 1/4" from the end. Can these be custom made by your company. Thanks Gary

I need to replace two spiral balances in a non-tilting aluminum window about 14 years old. I have identified the part needed as S400-30 red. bracket I hope you can help me with how to remove the old rusted bracket to install new ones #17-031

I noticed on the 10-324 shower door sweep you recommend a screw size. Do you also recommend a double side bonding tape that can be used instead? If so do you have a part numbe? Thanks David

My contractor threw away the fasteners. Do you sell new fasteners? If so,which ones are they and how much? And what do I need to drill holes? Also, do I need to put a drop of silicone on the end to keep the water from rolling out? My old one had that. Thanks?

The clear rubber material is about an 1" on the longest side. I hope this looks familiar in some way. I can't find a similar cross section part. I can't find the door mfg either. Thank you. Dale

I've attempted to replace the sweep in my shower door. I used a 1-inch clear vinyl. The problem is that I have a large gap beneath the drip pan that remains even with the 1-inch sweep. Do you have a sweep that is much longer than a 1-inch? I've attached a photo of the sweep and of the remaining gap. ... (cont.)

need rubber strips located on bottom of windstorm door

does this come with the rubber sweep and if so what is the deminsion from bottom to top?

Does this come with the two mounting screws that go at each end? If not, what size screw will fit this product? I bought a similar product only to find that it came without mounting screws. The holes were a nonstandard size, and I could not find a screw to fit them. The product was useless. ... (cont.)

Current sealing is not working well. Water is leaking past the seal and I assume this needs to be replaced. I am looking for a high quality replacement. Additionally current configuration has large gaps at either ends. Is there a better option to replace the hardware at the bottom to ensure end to e ... (cont.)

Hello I'm trying to identify and replace the bottom rollers for track sliding closet doors I do not think mine have any kind of offset due to the fact that they are three closet door systems two doors in the back and one door in the middle in the front I'm looking at your website trying to figure ou ... (cont.)

They are 1/2 inch thick Window is about 16 pounds One part is stationary while the other part with the pivot bar moves with the window Please send part numbers for the coil assembly and pivot bars.

I need to replace a 24" that has fallen off my shower door on which also the vinyl has rotted away. There do not appear to be any screw holes in the bottom of the shower door. Will I create these by driving a screw into the door? Or if my door simply wasn't meant to have screws used...is using two s ... (cont.)

I have a Shower Sweep w/drip rail that has came off of the shower door - probably the same item pictured in the 24" shower sweep w/drip rail image. What size screws do I need to reattach the sweep? All I will need are the screws, correct? Thanks!

I see you have a stainless steel roller cap! That would be way better than the plastic crap from my old crestline sliding glass patio door. the replacements are lucky to last a year. Im not sure if your roller cap would fit? The roller cap from side to side is very close to a quarter inch and the r ... (cont.)

I would like to know if your 30 inch drip kit will fit as my replacement shower. It is 30 inches but the screw holes are placed sporadically. First hike is 3.5 inches from end then next hole 9 inches from that hole then next hole is 15.5 inches away from 2nd hole.

Do you list the screws that would be used for certain parts you sell? Namely part# 90-139

I ordered these...they just arrived...no screws are included...do you sell the screws?

I bought part 10-324. What do I install it with? It didn't come with screws or anything.