Viewing all customer Discussions for:

38-001 Neutral Locking Handle, 2-3/8"

This is the latch handle from an aluminum window, one for the left window pane and one for the right window pane. These may date from around the latye 1950's. this is 7/16" wide, 2 5/16" center to center for the mounting holes no markings are present on the latch, window frame or window c ... (cont.)

I haven't seen a casement lock yet here with these dimension. Mounting screws 2 5/8" Gap between mount and lock point is 1/2" to 5/8" depending on where you measure it on the taper. Cranks 39-002 and 39-001 fit these windows perfectly, but I suspect that's rather standard?

Hi this is Sue from Aspen Building Products and I was wondering if you could help me. thanks sue

Need to replace per description and picture. Thanks.

My Getty operators worked out well. It turns out that some replacement latches for the bottom windows are also needed. Can you help with these?

Hello, I have identified part #38-005 which is the locking handle that I need for the windows that I have. I also need to identify the mating keeper for this handle. In other words,the part the handle hooks onto to keep the window closed. Thank you, Bill

my client old windows needs new hardware

Hi there, I am forwarding some pics of a part that I need for a Fentron window latch/lock. The latch works, but the pin broke off. Do you sell this pin? Thanks, Mary

Fenestra casement window handle. I previously ordered 2 5/8 handle that does not fit and is being returned. Looks like I measured wrong and should have 2 3/8 handle. Sending photo for confirmation of size and requesting recommendation for handle, a "neutral" handle would suffice. ... (cont.)

Hi, We are trying to find replacement parts. The first photo is a latch from a sliding window. it is embossed "SEASON-ALL" on the opposite side. The second photo is the bottom weather stripping from Alenco windows. the 4th. & 5th. photos ate from an unknown DH window. This part goes into the side ra ... (cont.)

I purchased some 38-001 window latches. They nearly work but the gap created when the latch is closed is to tight to fit my windows. I new ones look like they are about 3/8 of an inch in gap. The old ones are have about a 1/2 inch gap. Any help?

I am redoing some steel casement windows, i need new operators (Left and Right handed) and latches. Attached are some photos. I was wondering if you could identify and if you had the same in stock. You Neutral Locking Handle, 2-3/8" Product Code: 38-001, looks like a match to me. What do you thi ... (cont.)

Recently my parent's house was burglarized. They gained entry through a casement window that was mounted fairly low to the ground. It appears the window pane that normally opens was pried away from the frame enough to then pull it away resulting in the gears inside the crank breaking. I've lo ... (cont.)

Hi. What type of locking handle should be used for a glass casement window, which, I believe, uses a #39-001 9-inch window crank operator, which I want to buy from your company? What's the difference between handle 38-005 & 38-001? Do you ship to NY &/or PRico? Thanks

I have tried your 38001 and 38005, neither of which fit the keepers. I need several of these items, with left- and right-curved handles, so non-curved handles would be better. Thanks for your help and guidance, Brian

We are interested in purchasing 100 of these fasteners for steel framed windows. We have a Government Maintenance Contract where these type of locks were used on buildings built in the sixties. They are no longer avaialble in Australia. The locks on these windows are left & right handed with the han ... (cont.)

Do the 38-001 screws come with the locking handle?