Viewing all customer Discussions for:

39-013 Casement Window Operator, 13-1/2" Arm

I am a licensed General Contractor, wrapping up a remodel on a house we bought to flip, and have it for sale now. In doing final clean yesterday, I noticed the windows had some issues. The windows are BestBilt casement windows, and while most are vertical, some are horizontal. They all appear t ... (cont.)

I am selling my home and need a replacement casement window crank arm or whole mechanism for a norco casement window in bronze color. Please let me know if you have a part that will work? Norco is owned by Jeld Win now I believe.

I have a casement operator with an 11" arm from the center of the wheel at the end, to the center of the gear. Do you have anything with that dimension?

Hi there, I am looking for what you probably would call Traditional Style Crank Operator (both left and right side), with 13" arm. I was not able to identify it on your products' list. Image enclosed. Details on the operator: Made in USA US.PAT.4505601 PAT.Canada 1986 U.K.PAT.2135397 35 I w ... (cont.)

I am seeking replacement window operators, both LH and RH for Caradco windows which were installed in 1966. The arm measures 14 1/4 inches as measured from the center of the nylon roller to the center of the gear. I have found no other identifying markings or stampings. Robert

I need several replacement Truth parts in the color "Clay". Specifically: 2x 38-144 2x 38-160 1x 39-013 1x 39-014 Can you get these? Thanks!

Caradco is exactly what I need however I need it to be 11". Do you carry an 11 " Caradco window crank?

I have a window opener that says on one of the arms and there is a stamp on the bottom of the mechanism that says 7701.

Looking for a right hand truth hardware crank 13.5" Part #40055 Bronze with a 11 3/8" track

I wish to buy replacement cranks. Crank body is cracked, thus disabling the movement of the gears. Are these available through your company. If so please notify me as to price. Thank you. DF 1100 CCMC 9164 & 11404 Brevet Can. #1, 160, 103 Brevet U.S.A. #4,400,923 A-440 A3, B3, C3 ... (cont.)

I need to replace both the right and left cranks/arms of a bay window of a house I purchased. Not sure of window brand. Arm of crank has rimco stamped on it. Please help Jason

Hello, I am looking for Clawson window crank. I have attached 3 pictures of the crank. The numbers on the back are: 5232001 1245 and the one below is 45251. Hoping you can help me. Thank you. Mark

I am looking for a replacement crank for a casement window, The house was built in 1962. The length is 12 in and the height of the assembly is 5/8 of an inch. Internal gear is stripped. Regards

Hello, I'm trying to identify the type of casement window operators to use to replace these. Can you assist given the attached pictures? Thanks, Peter

truth cranks

Hello I am looking for a Right and a Left Casement operator, the numbers on the back are 40055 and 40056. I have tried to measure the arm and I come up with a measurement of 11.5" from the pivot to the end of the nylon roller

I have a Truth window actuator. Stamp number 45251. Its white. If there is a better quality replacement I'd be very happy.

Need help in determining which replacement part to order for the Caradco window operator shown in the photo. The gears on the operator slip while opening and closing. The ones that we have seem more complex than what I can find on your website. The arm is 13 1/2". Please advise. Thx. ... (cont.)

We have 2 windows that are hinged on the left in which the crank is stripped. I believe the arm is 13 inches. We're also looking for a price on weatherstripping. The picture above is a little large, but we made it work. Also, we need a new lock mechanism for the same windows. Thank you! ... (cont.)

Can you help? what do you have that will replace this old Casement window Operator that is 13 1/2" long. Thank you Jean