Viewing all customer Discussions for:

39-013 Casement Window Operator, 13-1/2" Arm

I need a Minnkota window crank for a casement window. The window in hinged on the left from the outside and is white

Looking for replacement Weather Shield left handing operator, 13-1/2" arm, sill mount, handle has no screw to enable removal. 42 & LH stamped into rear of housing. Operator body is 5/8" thick. 3" & 1-5/8" center to center on mounting screws. Thank you!

This Truth operator is marked 40055 but does not have the arm length of 9 1/2" as mentioned on the internet. The dimensions are: arm length 13 1/2" - width 5/8" - thickness 5/32" Screw hole spacing is 3.0" and 1.625" The window latch is on the left. Do you have a replacement for me? ... (cont.)

The attached pictures shows the casement window in closed and open position with the markings on the handle and the hinge. Looking for replacement mechanisms and handle as the parts are worn out and difficult to open and close.

I have quite a few Jeld-Wen casement windows that were installed 23 years ago that have failed operators. I am sourcing replacement parts and companies that can install them in Greenville, SC.

Looking to replace all 4 of my casement window operators. I will need 2 that open left and the other 2 that open right.

I guess I need to replace the entire system, the white operator broke off from the metal piece attached to the window, only marking I can find are the number 30744 on the shorter arm and "Truth" written somewhere on the hinge

The crank turn will open the window but it will not catch to close it. Just turns but doesn't bring to a close.

I am looking for a replacement for this Truth 40055 left-hand casement operator.

Aluminum part housing

I need to replace this crank mechanism is this something you guys carry?

I need two left hand and two right hand assemblies.

Only marking is "RH" on underside of mech. Cover over gearbox does not appear to be removable - one piece casting.I see the brand name "Caradco" on the knob. Distance from center of pivot to center of outer roller on arm is 13.5 inches. Thanks

I have a duplex with older crank out windows. Some need crank handles some need new arms I cant seem to find any info on Rimco brand. Any help would be greatly appreciated.I have removed the crank out assembly for the right side looking out of window.Its says LH unsure why but no numbers.If need mo ... (cont.)

I need the is part and the other part on the top of the window as well

Looking for 12-15 replacement mechanisms

Hopefully three pictures are worth more than 1000 words.

We just bought this home and the window won't crank shut all the way, or lock. I found new locks but I don't know what crank to get.

45135. Truth. 13 1/2". 4004lB

Marked with "truth". Inside cover says 45304 LH base plate says "truth" and 45251 arm says 40051A gear teeth on arm are stripped/rounded. I need several of these.